X+ Tool (Setup sheet and more)

[Andreas Stute - InterCAM]

Hi,

here is the new Tool from us:

 

Download

 

This install programm contains the follow items:

(select at the install question English as language!) The install programm creates an toolbar. If you have blockes VB-Scripts, you have to do it manualy. You will find the "X+" menue in the toolbar list.

 

- XSetupSheet

The setupsheet for X

 

- Xchgnci

With this tool you are able to change NCI Names in the OP manager - for more than one OP

 

- TList

The Tool-List

 

- X+

With this tool you can change the style from the OP-Manager. The Icons of the OP-Manager will stay as visible. You can change the backround color, the font color and style.

Sure there is a reset button to bring back the Mastercam default setting.

 

Regards

Andreas

 

 

InterCAM-Deutschland GmbH

- Germany -

EMail: [email protected]

Internet: www.mastercam.de

 

This tool was created by GMCCS - Guenther Massimo

[Storkman]

Pretty cool. Thanks.

[Jim at Gentex]

Thanks Andreas!

 

You da man!

[john316]

.

.

I downloaded it. I'll get back when I have a chance to check it out.

 

Thanks Andreas.

.

.

[Müřlıń®]

WOOOOOOOOOOOOOOOOOT!!!!!!!

 

You guys ROCK!!!!!

 

 

Murlin teh wait is over

[Bruce Caulley]

Ok. First question. How do I get the setupsheet to output to a pre-saved excell template the same as in V9???

 

Bruce

[Midwest]

[Müřlıń®]

Hey Bruice, use the toolbar to launch ncdatasheetx.........just get a old setup sheet and add them one at a time until they are in the same order as your last ones......

 

 

This is soo good I almost soiled mehself.....

[malibu]

HI Andreas,

I can not get it to work program point not found?

[Bruce Caulley]

Thanks Murlin, but it cant seem to find the XLT. I used to have ncdatasheet.xlt saved in the chooks folder and it would use this as a template. I just tried xsetupsheet.xlt and it didn't work. I saved the setup as test.xss and tried it with test.xlt save in the chooks folder and the X+ folder all with no luck. Am I missing something or am I just too excirted to think straight?

 

Bruce

[Müřlıń®]

AHHH I use HTML/Spreadsheet format...its a perfect little setup sheet for me....never used the XCEL one

[kinglouie V]

before we dump this how do we manipulate this so it benefits us???

 

quote:

---

Sure there is a reset button to bring back the Mastercam default setting.

---

where?? Not ungrateful guys but can't seem to figure out where to find propertys....

[Bruce Caulley]

How do you mean Lou?

[kinglouie V]

Bruce!! helppp!! glug-glug.....

 

quote:

---

The original point and click interface was a Smith and Wesson.

---

BTW I love that quote.

[Müřlıń®]

Lou click on the A icon on the new toolbar, then click on the windows Icon and the ops will change back to white....

 

 

I kinda like the blue and going to leave it just the way it is.....

[Bruce Caulley]

I think the excell output may need some tweeking. It starts on a different line each time so even if I could get a template to work it would probably be RS anyway.

 

I don't mind a bit of work to get this going as I know the V9 ncdatasheet took a while to be perfected.

 

Bruce

[kinglouie V]

I like the blue too, but I can't even find the new toolbar to resize my font. Anyone got pic for my slow dumba$$????

[Müřlıń®]

right click on the main toolbar at the top and bring up the toolbar, it is named x+...

[kinglouie V]

YES!!! I'VE SEEN THE LIGHT!!!

 

right click ribbon bar

click customize

in toolbars or right click menu...

scroll down in drop down "catagory" menu...

....to X+

 

I've put all the buttons in my right click menu

to play with....

 

 

vielen Dank Gunther und Andreas

[Müřlıń®]

Meh X templet

 

 

[kinglouie V]

hey!! that's very slick murlin. how do you get it to do side 1 and side 2 ???

[Müřlıń®]

settings/customise/dropdowns/right mouse button.

 

Then make two new toolbarss. Drop the first slide1, at the top of the list in the right mouse menue, and drop slide 2 in the top of list in slide1 toolbar...

[kinglouie V]

thanks!!

[Phil Herman OEP Machining]

Thank you very much. This is what I have been waiting for. I love it. I see the tool list does not do lathe tools, unless I am missing something.

[malibu]

thanks Andreas