Mastercam NewsFlash February 2007

[MIL-TFP-41]

quote:

---

We have partnered up with cutting tool vendors like Dapra, Dura-Mill, and Iscar to provide you with recommended feeds, speeds, and cutting information for their machine tools. Their libraries are all available with Mastercam.

---

Ok, I have always seen the Dura-Mill library...but where is the Dapra library??? Am I just missing something??

[gcode]

You can download it from the Support pages on Mastercam's website

[Mark H]

Took me a while, but I finally found it here...

Mastercam's cutting tools

[Rick Henrickson The Boeing Co.]

I didnt see any tool library to download for duramill just takes you to there website

[Todd Tracey from Fastech]

The Duramill libraries, as mentioned above, are already there. look in the Mill Tool folder and you should see them. it's the other 2 that I can't find either.

[Mark H]

quote:

---

I didn't see any tool library to download for duramill just takes you to there website

---

Yeah you're right... I was in such a hurry to go to lunch I didnt click on the actual links.

[Zoober]

Ok, back to the first question........

ARE there any other libraries?

[G Caputo]

Bump

 

quote:

---

Ok, back to the first question........

ARE there any other libraries?

---

[CAM CRAZY]

bumping the bump