ENGRAVE

[Stefan Salmen]

Hi guys,

 

please could anybody test the file below on OS WINDOWS XP 64and Mastercam X2 MR2?

 

Try to regenerate the engrave operation.

 

Download ENGRAVE.ZIP

 

May be we have a problem here in Germany with the German OS. If we regenerate the OP we receive an error message

 

Could anybody duplicate scenario?

 

We sent this file allready to CNC-Software but QC can´t duplicate it.

 

Thanks in advance.

Stefan

InterCAM Deutschland GmbH

[J Coulston]

First I receive the message.

quote:

---

estamp.exe has encountered a problem and needs to close. We are sorry for the inconvenience.

---

and then the same error message you have.

[#Rekd™]

Hi,

 

No problems with Windows 2000 32 bit.

 

Try making it into smaller operations and see if that helps. In V9.1 It would lock up if I did too many chains at once.

 

John Ford

[Mark Baker CNC Software]

I didn't have any problems regening with X2 MR2, running XP Pro

[Allan Brown]

Same as Mark...

 

No problems here on X2 MR2, running Windows XP Pro (US English install).

[iowajim62]

Attention to details is necessary.

 

quote:

---

test the file below on

OS WINDOWS XP 64

and Mastercam X2 MR2?

---

quote:

---

No problems with

Windows 2000 32 bit

.

---

quote:

---

running

XP Pro

---

quote:

---

running Windows

XP Pro

---

[Kannon]

quote:

---

Attention to details is necessary

---

I must be missin something

[wdemock]

Same thing is happening to me on XP Pro x64 running MR2. Is it a software problem with mastercam?

[Matt Close (In-House Solutions)]

I've had something strange happen a few times.

 

I generate an engraving toolpath, and it tells me there's problems with the geometry. So I keep the toolpath, fix the problems and open the "Geometry" tab to re-chain. As soon as I click re-chain all Mastercam locks up and gives me an unknown error and shuts down.

 

 

 

XP Pro SP2, X2 MR2 SP1.