Mastercam Documentation Survey

[Christine B from CNC Software]

Thanks to everyone who has already responded. The survey closes on May 15, so make your voice heard now. The survey should take only about five minutes to complete, but the feedback is very valuable to us. And remember, five winners will be chosen randomly from all participants to receive a free Mastercam University 12-week online training course (valued at over $250). Thanks for choosing Mastercam!

 

Click here to take the survey.

[Hardmill]

OK its May 16

 

Wheres meh prize ??

 

 

PEACE

[35K chipper]

i was the one to win. not you chippy!

 

35k

[Hardmill]

:frown:

 

 

PEACE

[Christine B from CNC Software]

Congratulations to the following participants in the Mastercam Technical Documentation Survey! They have each won a free online course through Mastercam University.

 

Mike Ortega from LMCO (Lockheed Martin)

Steven Shea

Ted Ly from Boeing

Mike Elliott

Alex Murphy from NASA

 

Thanks to everyone who participated - your feedback will help us provide the best documentation in upcoming versions of Mastercam.

[gcode]

I demmand a recount

 

[JNO]

Lockheed Martin

Boeing

NASA

 

Either the majority of people in the aerospace industry have a lot of time on their hands, or the winners were not selected randomly?

[gcode]

There are thousands of seats (and users) in those three companies

[spade117]

w00t!

[Mic6]

quote:

---

Mike Ortega from LMCO (Lockheed Martin)

---

FTW!

[robh]

sure coulda used one of those