2nd Shift CNC Programmer/ Supervisor San Diego, CA area

[Brian Cerkas]

Gentlemen:

 

Looking for a 2nd shift supervisor for a Job Shop in the San Diego, CA area. This is a new position to develop a 2nd shift for this facility.

 

This person should have 5 years experience minimum of programming and setup from blueprint with G-code programming at the control. 1-2 people operators will be under them for starters. Hands on position running machines, G-code programming, setup, troubleshooting, mentoring, operating 5 Axis Haas and Mori Mill/Turns. Needs to be independent and responsible. Mastercam X4 is used for the 5 axis programming and fixture design.

 

This is a long term position to develop and maintain the 2nd shift department.

 

90 days HMO/ PPO 1 year 401K. 6-8 hours of OT per week with M-Thursday 4:30PM to 2:30AM.

Probably a $2.00 shift premium. Which is negotiable.

$25 to $30 per hour for the right person.

 

Email me at [email protected] with any questions.

 

Thanks,

 

Brian Cerkas

Technical Resources Inc.

[JNO]

I thought 5 axis jobs in Cali paid more than $25-$30?

[Joe788]

quote:

---

I thought 5 axis jobs in Cali paid more than $25-$30?

---

quote:

---

Haas

---

[Brian Cerkas]

That's what the client gave me for parameters.

[Guest CNC Apps Guy 1]

Man... you guys are brutal.

[Dave.L]

quote:

---

That's what the client gave me for parameters.

---

I think it's nice that the parameters are clear and up front.

 

It's simple, if it's too low for you, walk away.

 

But, if you read the parameters, it does not say anything that the position is for a 5 axis programmer, only that the company uses MC for 5-axis.

[RandleXX]

I bet this is the company in Poway that I looked into before.. Too low $$

[Brian Cerkas]

Randle,

 

No it is not in Poway.

[Brian Cerkas]

Someone who is an up and comer that is polished and good skills would work.

[taperlength]

Sounds like a good job, starting a new shift and a four day week. I'd go if I didn't have roots down.

[Brian Cerkas]

If anyone knows someone that would be good for this and can give someone a leg up let me know. Steak and Lobster dinner for two is on me if I place someone you refer to me.

[[email protected]]

JB is around San Diego isn't he

[Brian Cerkas]

Yes, San Diego area. North side around Vista, CA

[[email protected]]

Do I get a lobster now?

[Brian Cerkas]

Sorry Keith, I need to place them and get paid, then I deliver the Lobster, and Steak.

 

Thanks,

 

Brian

[[email protected]]

These ( ) mean I was jokin

[john316]

.

 

quote:

---

Sorry Keith, I need to place them and get paid, then I deliver the Lobster, and Steak.

---

If you ever heard of JB you would get the joke.

 

But please, don't ask.

 

.

[[email protected]]

When he answered....

quote:

---

Yes, San Diego area. North side around Vista, CA

---

I thought he knew him

[Brian Cerkas]

aaah! I see. Still learning.

[Brian Cerkas]

I thought JB stood for JOB. Sorry.

[[email protected]]

Its all good and you DO NOT want to know JB

[[email protected]]

You would buy everyone on the forum a lobster dinner NOT to refer JB

[Zoober]

And drinks, so we could laff about him!

[Guest CNC Apps Guy 1]

ROFL.

 

Yes Brian, be VERY careful of candidates with those initials which I will not speak!

 

You won't get paid if you place him and there's a 99.9999999999% chance he'll soil your reputation. We're just looking out for you.

[Joe788]

BD arriving to leg hump in 3...2....1....