Check out X7 verify

[Chris Rizzo]

[mkd]

so what the the cycle time for Darth Vader? :unworthy:

x7verify

[gcode]

I am really liking X7 Verify.

I program some very large impellers and X7 verify just tears them up.

In X6 I reached a point where I couldn't verify the toolpaths anymore .

X6 would just roll over and die. X7 Verify blows right through it.

plus you can make your stock translucent and bring your finished model

into Verify, That is really useful

[Mick]

The verify seems to work pretty smoothly, and the graphics are certainly better than before.

 

I get this error (attached) when I verify an Okuma Multus programmed part:

 

The toolpath generates, posts, and works fine on the machine.

[gcode]

Well that explains everything

[Rotary Ninja]

Is that pig latin?

 

I came in here thinking I was going to watch a video on X7 Verify. What's with the Etch-A-Sketch?

[CamMan1]

I think he is trying to say that the Etch-A Sketch is better at verification than X7!

[TK-32™]

I think he is trying to say that the Etch-A Sketch is better at verification than X7!

 

ahahahhaha

100 eMasterCam points for you sir!

[CADCAM3D5AXIS]

G were are the settings to make the stock translucent in x7 Verify

 

I am really liking X7 Verify.

I program some very large impellers and X7 verify just tears them up.

In X6 I reached a point where I couldn't verify the toolpaths anymore .

X6 would just roll over and die. X7 Verify blows right through it.

plus you can make your stock translucent and bring your finished model

into Verify, That is really useful

[Jayson Kramer]

Dang you missed our free Webinar on this yesterday were we showed it.

[CADCAM3D5AXIS]

Hi Jay yes i did miss it is it on the site for replay ? that way i can see all the tricks ??? i see the changes but i can not get the work piece visability button to check so it will work like your pic shows.it does cycle tru 3 settings 1 solid 1 tool only and then no part ?? what am i missing ??

TIA

[CADCAM3D5AXIS]

Jay I found it in some of the graphics opacity setting. thanks for the input how about the Webinar are they going to post it online for viewing ???

Thanks Again To all

Who Help point us in the needed direction :cheers:

[Jayson Kramer]

yes I hope by Monday. you want me to post here?

[CADCAM3D5AXIS]

Yes that would be Very Nice, Thank You For All the Work You Guys Do It is Greatly Appreciated for the ones who do not get the time to see it live !!!

Thanks Again Jay