Holder doesnt show gouges using turbo in verify

[Thee Rickster ™]

X6 MU3

 

I'm new to using holder in toolpaths for gouge checking in verify

 

Is there any way to get the gouges from the holder to show in verify

using turbo?

 

thanks in advance

Rick

[crazy^millman]

Not that I am aware of.

[Thee Rickster ™]

Thanks Ron.

 

 

Plus, I get this error when generating paths, even if I put 10" in the overall

tool length stickout, when in pic 2 @ 2-1/2" stickout you can clearly see

that the holder is not even close to gouging.

 

.

 

pic 2

 

.

 

.

when I try regenerating the paths in X7 I get the same error.

 

any help or incite will be greatly appreciated

 

Cheers

Rick

[#Rekd™]

Vericut FTW!

[Glenn Bouman]

X6 MU3

 

I'm new to using holder in toolpaths for gouge checking in verify

 

Is there any way to get the gouges from the holder to show in verify

using turbo?

 

thanks in advance

Rick

 

 

That's the whole idea, it compensates for the holder so there are no gouges. The message that pops just says that there may be extra material left.

[crazy^millman]

ICAM PSE Can as well.

[Thee Rickster ™]

That's the whole idea, it compensates for the holder so there are no gouges. The message that pops just says that there may be extra material left.

 

Hi Glen, thanks.

 

Maybe a good enhancement would be for the message to pop up when it "actually"

compensates for gouges, then shows you where the extra material is left.

That way you dont have to check every path closely to see if It needs more cutter length to cut

and not miss material.

 

I am liking using the holders, for it does show in verify(in red) the collisions.

 

[gcode]

do you have Verify set to check the holder?/

see attached screen shot

[Thee Rickster ™]

Gcode, can you set that in X6 also? missing it, if it is indeed there

 

I am programming in X6 and running it through X7 verify

to see the differences in both versions.

(meeting time, back in 1/2 hr)

[gcode]

Gcode, can you set that in X6 also? missing it, if it is indeed there

 

beats me. I haven't used X6 in over a year

[Thee Rickster ™]

Good one! You beta geeks are so funny....

 

So this is new in x7 ?

 

If any one can help me utilize this feature

In X6 to the fullest, I really would appreciate

The help, even with a dash of X7 sarcasm.

 

Thanks in advance

Rick

[crazy^millman]

Only way I would know of in that version would be to make a custom tool with the holder draw along with it. Then it should so you if the holder it hitting.

 

One of the advantages of the new Verify is expanded capabilities people have asked for years.

[Thee Rickster ™]

Thanks Ron.

 

So far no show stoppers, not ready for X7 just

Yet, but I really like what x7 verify has improved

Especially verifying in any custom WCS is saweeeeet !

 

Fast and furious!