Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
I build forging dies and use ball mills almost exclusively for cavity roughing. HSM Area Clear and a 3/4" inserted ball nose is my method of choice. With HSM Rest Roughing and an STL from verify, I can go right to semi-finishing with a 1/4" ball nose with out worry. Our productivity has never been better.
Learn it...
Spend some time with it...
You won't be disappointed.
we had a power failure with the probe in the spindle....Now I get a yellow 281 No SPDL ORIENT (SPECIAL TOOL) error msg...
My book is missing...Grrrrrr....
and I'm waiting on a return call from our tech.......
Anyone know how to clear this or get the probe out of the spindle?
It's a Mazak 700D with a Matrix controller
Solid or Surfaces?
If surfaces, when I run into unusually long crunch times, the first thing I do is Analyze/ Test Surfaces and check for a bad trim or surface normal suddenly reversing.
Is the GF's dad familiar with Mastercam? A pizza and a 12 pack would be a good way to get some pretty intensive 1 on 1 training from him if he is.
If not, then use the Help files in the program to familiarize yourself with the basics while you're waiting for the books to come in the mail.
If anyone has any doubts...Way back when the Benchmark thread first started, My time was 11:40something On a Dell 3.2g Dual Xeon box running X2 (I think) and XP 32 bit. After installing Win7 64 bit and X5, my time dropped to 3:18.
I believe!
I'm guessing you're trying to patch over a hole in a model?
You can try to 'Untrim' the arc surface, and hope it covers the hole, or you may just have to create another surface over the hole.
Yes! But what to do if a part is flawed? Anytime I get a model that takes an unusually long time to generate a toolpath, Analyze/ Test Surffaces is my friend. Even the smallest surface where the Surface Normal suddenly changes direction can send Mastercam into shock.
Depending on the size of the model, I usually convert solids to surfaces for tool paths. Seems to process quicker that way. I've never noticed a difference in part quality between the two
Are the holes SUPPOSED to be there? Did you try analyze surface? I've seen surfaces come in on customer models with holes that are a result of some weird trimming during the import process. Usually untrim and retrim will fix it.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.