OTOMMYO
-
Posts
57 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by OTOMMYO
-
JP saves the day again
-
I use water based coolant, but really flood it. Keep tool free of any chips or swarf.
-
M6400 looks like the ticket Anyone using one, and any extras I should add?
-
Im due for a new computer here at work, and would like to hear some input on what Dell laptop works the best for x3. . The computer will be used for MC X3 w/solids, Email, and internet only. . All our programs and files are saved on our companys external Cadvalt. . Thanx, Boys and Girls
-
Take them to your local Auto Body shop.
-
Copy Or Moving Entities From One Level To Another Bug
OTOMMYO replied to NeilJ's topic in Industrial Forum
Nice Eric +10000000000000 -
Far out Dude
-
Large
-
Welcome back Phill, 2 things to know... Circles GOOD. NeilJobs Bad. Are you still in Pa?
-
Mastercam Part 3D/5ax you want to see running on a robot?
OTOMMYO replied to Tyler Robertson's topic in Industrial Forum
Bernie can you send me that file please? -
Mastercam Part 3D/5ax you want to see running on a robot?
OTOMMYO replied to Tyler Robertson's topic in Industrial Forum
I'll make the wheels... Longboard for me -
large please
-
Here ya go
-
quote: Probably the best part of were I work is we all help each other because the boss fosters this attitude and approach. I would not describe this as typical or common in the machining industry. I started in this trade in 1992 and have never worked in a better environment than where I'm at now. It took six months for me to get hired here. The boss even read my blog and posts to Usenet before deciding I was what he was looking for. Sounds like you work at McDonalds as a microwave manager
-
Make like Mike Jackson and "Beat it" NeilJ
-
quote: Trial, lots of error, a good post, OJT, BC headache powders, and a few Yuenglings!Yea lots and lots of Yuenglings
-
quote: I think training and seat time are the only way to get to the level some of the people here are at+1000 to that, Unless you want to wate for JB's videos Do what you know over and over again till its easy to you, at that point slowly jump into harder programing. Seat time is everything. And dont worry, all of your questions can be answered right here, Just be cool and you can get all the help you will ever need. Welcome to the forum NY
-
What do you guys think of Sodick. We hate it!
-
we use several Lagun. They worked fine for 20 years with no magor repairs. I do think Bridgeport has the top of the line in manual mills though.
-
I know how, its easy
-
I turn my computer monitor sideways my horizontal and vertical machines use the same planes.
-
use an 1.25 ball endmill and mill it in.
-
we use small #1 or #2 centerdrills for engraving, they work very well and last a long time. As for font we use stick and turn comp to off.
-
can't be, why would JB need help? Don't he know it all?
-
Thanx Chuck that macro works perfict