ATG
-
Posts
372 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by ATG
-
Ok 15000 RPM SPINDLE 32 TOOL ATC THROUGH SPINDLE COOLANT PREP M CODES 4 SPARE AUTO GAUGING - RENISHAW GAUGING I/F ( WHAT IS THIS ) 3D TOOL OFFSET NC-3 LASER TOOL SETTER DNC-DT 100 W/10BASE 5 CONNECT THROUGH SPINDLE COOLANT 15KG/CM2 WHATS THE PRESSURE SUPER NURBS TYPEA E100 CONTROL CHIP PAN 4TH AXIS INTERFACE CHIP CONVERYOR
-
The Okuma does have the 15000 rpm spindle. Still waiting on all the specs as far as options. I don’t have any extensive time on either brands, mostly Haas and Fadal. So as far as I can see either is a better option. Anything to look out for on these two machines?
-
NEW Mazak VCN 510-II Vs. Used 2006 Okuma MCV40120 The Mazak is about 40% more $ What machine would you get, and why.
-
Thanks
-
How close of tolerances? Have you had any problems with the spindle? What options did you get?
-
Does anyone run this machine, what do you think of it. Are there any options I should be looking for? Primarily for a job shop, some government work, aerospace, molds, dies, hope I didn’t forget anything...... Thanks
-
Does anyone know where I can find the info on chrysler material spec ms6000-55 Thanks
-
Thanks Guys I will give these suggestions a try. Now that I think of it I never checked the settings in the machine. Also I didn’t wait after hitting input either. I will check the settings and wait on the input...Is there any curtain parameters to look out for in the machine...... Thanks again...
-
Ok, what do you guys use for the communications via RS232 for the okuma Lathes. I believe the controller is an osp 5000L. I've hooked up the db9 to db25 cable per the books spec. I've tried cimco and master cams editors to send the programs with no luck other than parity error. I’m not really sure I'm even getting the control ready the right way. I hit edit, then pip, then read, then type cno:, then hit Input and try to send the program. I've set the pc communications program according to the procedure sent by Okuma support. Any help would be greatly appreciated. Thanks Seth
-
I had a feeling that was comming.....
-
anyone.......
-
Ok I've searched through the forum and found vast information on X+ and I've been using it for a while now. Today I installed the newest version of X+ and now everything is in German. I've looked in the chooks x+ folder and the English lang dll file is already in there. I must be missing something...... any help would be great. Thanks Seth
-
-
Never Mind it was me with the problem, Not the link. Thanks Seth
-
Is that link also on the ftp, It wont work for me.....For the active reports
-
Thanks Guys I was wondering about that. I guess I'll use the technologies that are in the control for the offset. Is this how everyone else is doing it. Is there a way to get the technoligy out of the control and in my box..... thanks
-
In the parameters page, for passes. one or two. Is this normal or am i just doing somthing wrong. I've programmed the Agie before, now this seems diffrent. Thanks again
-
Just wondering if there is somebody out there programming with this type of wire edm. I'm kind of new to the wire programming and was wondering about the power library. I'm using a .01 wire but when I select that folder it still gives me different wire sizes. Any advice would be great. Thanks in advance...
-
I'll have to do it monday. Thanks....
-
Is there a way to change the Font so it’s a single line, not double? If the symbol was a square it would insert two squares. Kinda hard to explain, but hopefully somebody understands. I'm using the verisurf GD & P font.
-
I feel like I'm missing somthing. Did a message get removed or somthing? Or is this a battle from the past?
-
Axsys does Rock. I had a 3-d advanced class and it did cover HSM....Great Experience..
-
Wow thats just what I was looking for.....
-
Oh sorry you beat me to the qustion....thanks again.....
-
Just one more qustion. What folder do I have to unzip these to......thanks again....