SKIR68
-
Posts
169 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by SKIR68
-
Is MasterCam comming out with this feature in the next version?? It sure would save us 5axis guys ALOT of time!
-
settings,config, start/exit, check the box for Enable 3d connexion Device!
-
I finally talked my boss into new computers. We were using Dell Precision 470's Now we have 2 new Dell Precision T1500's with I7 cores, and dual moniters! (YEAH!) Before I took down the old system, I did the benchmark, 10min. 18 seconds. As soon as we installed MasterCam, I ran the benchmark again, 1 min 17 seconds! Now my boss tells me he wants to see TEN times the work from me!! Then i asked him for TEN times the pay! That didnt go over to well...LOL but im enjoying the dual moniters and I have a new space pilot on the way!
-
I re-downloaded the the driver for the third time and i think i have the problem solved. Thanks for your input!
-
i must have a bad video card.......
-
no duplicate geom. it works if i hit escape or clear colors but if i move or rotate the model then it wont let me select anything again!
-
Hey guys, we just started using our new Dell precision T1500 desktops with MasterCam. These are the computers MasterCam recomends. When i try selecting geometry sometimes it dosent select it. I hit "Esc" or clear colors and then it will select it UNTILL I rotate the model and try to select geometry again and it will NOT let me select anything else! Is this M/C issue or a driver issue? I did download and install the latest nvidia driver for the graphics card. Anybody else having issues like this?
-
What about Feature based machining and Feature based drilling???
