Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
We have an Okuma LB300 EX Space Turn with OSP-2000l control. I know the max tool length for live tooling in the vertical position is 4.5" (don't ask HOW I know).
My question is this, Is there a parameter or variable to set so i can have the machine alarm out if i touch the tool off and the offset is >4.5" ??
Thanks in advance!
I think its alot like "MoldMax" which is high Aluminum brass. Good heat disipation. The worst is drilling it. When we install waterlines through it, we like to gundrill them as regular drills tend to heat up and get stuck.
Control Panel, System Properties, Advanced, Performance, Settings, set them exactly like gcode posted in his screen shot.
I had them all checked make sure you click -Custom: Then change the settings.
It worked for me Sandybar, im running a invidia Quadro fx card with drivers downloaded from invidia.
Thanks again Gcode!
I have the same issues, also when i delete something, it stays untill i move my spaceball. I have a brand new Dell precision t1500 configured exactly the way my reseller instructed me!
What about FBM and FBD for Lathe????? What about stock recognition when i'm milling it away in lathe?? THOSE would be basic enhancements.( just my 2cents.!)
I use MCX5 in a mill/turn. I like the Plunge Turn toolpath. If you look under the Plunge turn rough tab, there is a Cut direction that you can set to Zig zag in either a pos. or neg. direction.
Is this not close to what you are talking about? I have only used this for about a month now, with a Seco tool designed for this with very nice results! It allows me to have more tool positions available on the turret.
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.