we got about 4 inches hear in new jersey and 1/3 of the wimps didnt come in i guess its nice to be rich$$$$$$

that late hit on #5 was the key to caralina's win eagles will fly again fly eagles fly go pats [ 01-18-2004, 10:34 PM: Message edited by: Hacsta ]

quote: They spout "KBM" but their Database seems like someone who's never had to cut a part for a living created it. +1000 [ 01-16-2004, 06:38 PM: Message edited by: Hacsta ]

wow [ 01-16-2004, 05:51 PM: Message edited by: Hacsta ]

crazy whats is the max rpm on them Haas ss 's you have?

quote: I got 2 Haas SS machines and was able to improve to 400 ipm to 600 ipm on cutting alum on our parts. what kind of cutter are using to go this fast ?

we got ours year and half ago, works great just wish we would have went for the ATC quote: I wish only that it had a few more Rev's. +1

quote: Their road ends in Philly next weekend +1000 G0 BIRDS They can't be stopped!!!!!!!!!! 4th and 26 thats a game that everyone will remember

quote: Make it dispense Rum & Cokes +1000 don't forget the lemon

Heres to the greatest F in forum on the planet Happy New Year [ 12-31-2003, 11:54 AM: Message edited by: Hacsta ]

You guys are to much!! they were great

quote: I didn't know how I was going to fixture it until previous ops were completed amen to that +1000 pucker factor

quote: High School Teachers said i'd never amount to a hill of feces James Meyette i'm there wit ya quote: It is a luck to do what you like ! Iskander teh Lazy +1000

My Haas watch says ***replace mocon*** [ 12-23-2003, 07:01 PM: Message edited by: Hacsta ]

went vo tec for electronics graduated highschool joined the army guard did that while working at pizza place (i was 19yrs old) nov. 1996 buddy calls me up says he's got job for me putting together packaging machinery for a oem , i said "SWEET " 3 weeks later i start here worked for 8-9 months straight with out missing a day then i fell part missing day coming in late. higher ups got fed up and our machine shop got slow and thats were i went, worked drill press and sander for about year then it happen i move up from sander to machine work,squareing parts up, making parts with 2 holes and a slot (2 place dec clearence holes) i always wondered how they got there (the slots). then moved to 2 axis super max conversational analam, the man should me the way, i got to use mastercam v7, i couldn't believe it , it blew my mind. i draw it, it cuts it, (well after a couple broken end mills and alot of reading and questions.(i gave this guy all his grey hair) we got a haas vf3 got to do more programming, then a v4 two mini mills then another vf4 and a tool room mill, i never though i'd be doing multi axis toolpathing SWEET

quote: Yeah I am taking the next 12 days off sweet !!! after tomorrow i'll be off till the 5th gotta love it merry christmas [ 12-24-2003, 10:07 AM: Message edited by: Hacsta ]

i tried both ways they work good, mill man keep it pumping through it's a good thing thanks for the help you guys p.s. i used the g154 p99 at the end to bring the table forward and to center works SWEET thanks again and again and again

dang you the code master general or what its gonna take me a little while to get this but i will definetly give it shot thanks crazy man

mill man i tried your post mod, i get a g154 p0 that freaks my haas controller out, i guess i have to start at g55 which is p1 I was also tring to mod the post to go from g54 thru g59 then g154 p1 etc.. follow me? but i'm not that good yet

great thats another way i'll have to try out on the machine with the new software , crazy . the new haas software has the workoffsets named g154 p1 (g110) g154 p2 (g111) etc.. i wonder if the older software will understand this format, only one way to find out, thanks mill man for the code

got it workin thanks guys for the help here's to friday

SWEET , thanks for the help

can anyone clue me in on what lookfor in the post?

so how can i change this in the post so it outputs g110 g111 etc.. instead of g54 p1, g54 p2 i'm useing mpmaster.pst

wow is that vb and would it be hard to make that cut conventional? [ 12-08-2003, 11:21 AM: Message edited by: Hacsta ]