Hacsta
-
Posts
191 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Hacsta
-
just my 2 cents but i extended then broke at intersection
-
10 MINS desktop acer power 2000 2 1.86ghz 2gb ram
-
how bout in contour add a finish pass with its own finish feedrate. like in pocket. right now i have to go to toolpath editor to do it. just my 2
-
hey guys i had the same thing happen on a 2D radial slot. i did standard pocket with helix entry and it gouged my part all the way through. the gouge didn't show up in backplot or verify. i also had this happen in circle mill when i picked geometry not point. machine master g is steamin
-
i am also having problems with tabs in X in mill i select tabs, i use manual tabs place them where i want , i check the box for seperate op to machine tabs away. when MCX makes the separate op it make a router cutoff operation. when i run the op it ramps up from the center of the part(gouging the part) then it machines the tabs away.
-
how do i send to machine using eithernet to rs232 .
-
speaking of video cards we have a 3d labs wildcat vp760 what should the setting be for this card in x. i noticed that the backplot in x blinks alot i hope its just the video card thats for any help
-
yes its the same lock up mc_exitfunc
-
locked up while tring to change level of entity from level 1 to level 3
-
i wonder y it never did that in v9???
-
your good you!! you your good!! you rock prism rocks ROCK !!!! mmg tells me your the man over there.
-
yupper that what i got in the the drop down menu. when i pick all file from that drop down menu. it shows all files . but when i have sldprt it doesn't show anything.
-
just got x yesturday. i've read the books while using x . my problem is when i try to convert a .sldprt file the files do not show up in the window but when i pick all files they do . engneering is using sw2005 not trying to hijack thanks for any help
-
Anyone have experience with Harvey's plastic cutting tools?
Hacsta replied to Tom Szelag's topic in Industrial Forum
real sharp. i wish they came in bigger sizes. -
quote: you should also look into presetting the tool lenth off line since we went to this system i cant see it any other way set it and forget it the .100 jog in the haas is crazy in the z, .01 for me.
-
Looking for solid carb cutters for deep narrow cavities.
Hacsta replied to MetalFlake's topic in Industrial Forum
That's Hot -
what a site thanks toolfab
-
I think i sharted
-
i saw the screen shot in t&p of version x! it gave me goose bumps. Bring it on
-
going to imts would be the mother of all "tool shows" since i've never been there and from what i hear its big. mmg and I have talked about going but that's as far as we've got. hint hint james you say you can't walk the whole thing in a day. Now thats big
-
i can't wait to see the set up of ver.10 i heard its supose to be like solid works.
-
O/T One of the biggest Music Festivals in the Country
Hacsta replied to Toolfab's topic in Industrial Forum
"HOW BOUT A REVOLUTION" -
why don't you try slot mill, change angle to like 1.5 to .5 degrees and play with step overs ,ruff and finish passes and your in .meaning you can almost go as fast as you want with in reason. no problem i'll be here all week
-
i'm here, been busy with the HOT jobs lately
-
jinx