mwc815
-
Posts
68 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mwc815
-
I don't need that, I wasn't sure about other formats. dwg, step , etc.
-
ok, thats what I needed to know.
-
In a small shop with 5 seats of X6. All pc's run XP. Looking into upgrading to Win7. Not sure that all the computers will support 64bit. Have a couple questions. Will X6 32bit open X6 64bit files? Will X6 64bit open X6 32bit files? I see that 64bit won't let you save backwards. Can you still save as different file types? That is, can I save as a .dwg or .x_t file and then open that in a 32bit computer? I would prefer to keep everything the same, but more memory is good. Thanks, Mike
-
No, there was a full filepath in the log. I've never had any trouble with it either. The funny thing is it didn't flag anything from the MX6 version. I think it's a false positive, but I'll need to convince the boss.
-
-
Hi, I ran a scan on my computer with a program called superantispyware. It found some tracking cookies and it said the X+ uninstaller file for MCX5 was a trojan. I let the program remove it and ran the scan again. Now it said that the installer file for X+ for MCX4 is a trojan. I don't use X4 anymore, so I let the scanner remove that file too. It's scanning again now. I'm hoping these are false positives, because otherwise I'll probably have to remove them from the 3 seats of Mcam.And I really like X+. Any thoughts? Mike
-
Data paths in config and machine def back to default??
mwc815 replied to Thee Rickster ™'s topic in Industrial Forum
I don't update unless I know it's an older file. Like X3 or earlier. Most of my work is new every time. -
Data paths in config and machine def back to default??
mwc815 replied to Thee Rickster ™'s topic in Industrial Forum
I'm not sure if this matters but are you doing file/open or file/update folder? Mike -
See this topic for the pocket problem. Someone broke the apply button. topic Mike
-
I think you need parenthesis there. 1/20mm = .001969 1/(20mm) = 1.27 Mike
-
I get that too. It will work if I set the chain manager to 3d. Even though the text(geometry)is in 2d and on the c-plane. The only time I have a problem is with the window selection option. Mike
-
X5 Last cutter used will not remain, X4 works fine
mwc815 replied to dan@advancedmold's topic in Industrial Forum
I have the same problem, and all my file paths are correct in config and control def. Mike -
It isn't turned on.
-
I get this too. It never did this before X5. Mike
-
"Is your lead in/out too large for your contour? Try changing the size. I have gouge check and infinite look ahead on without a problem. " No, it wasn't even close to being a gouge. 2" hole, 1/2 em, small lead, cutter comp set to computer. That was the only operation that was a problem. Mike
-
a coworker had an issue on the leadin/out on an inside contour of a circle. With gouge check on, there wasn't a leadin/out. With gouge check on and infinite look ahead off, there was a lead in but not lead out. With gouge check off there was a leadin/out, and no gouge. So he used circlemill instead. Mike
-
Don't use stl files, happens all the time with large surface ops. Mike
-
quote: did you do file/open or file/update ? Not sure what you mean? when opening a MC file? I've had issues when I did file/open (with X4) on files created with previous versions of Mastercam. It was looking for the post in the folder that the .mcx file was in. When I did file/update from the Mastercam toolbar everything worked. Mike
-
did you do file/open or file/update ?
-
I have done that, I also changed the default toolpath group names to "Toolpath Group-MCX4-1".
-
Same problem I had, I got it to work using file/update instead of open. If you can't just open a file, then I think it's time for a new file extension. Mike
-
Just curious, you said you had that program for a while. Do you know what version it was made in? I've had older files that I had to use file/update folder not file/open to get them to work. Mike
-
Enhancement - Would You Find This Useful?
mwc815 replied to Ocean Lacky™'s topic in Industrial Forum
You seriously want to add a 19th page of parameters to a 2d contour? Mike -
do you need maintenance for MU1?
-
Looking for cool air generator
mwc815 replied to Rick Henrickson The Boeing Co.'s topic in Industrial Forum
Vortec cold air guns Is this what you are looking for? Mike