Deleted links to the HLE. The official terms given to us for hosting the HLE was that it had to be behind a password wall and could only be distributed to our customers so I can't allow links that bypass that.

Googling the phrase "Divide angles severely" in quotes only returns this thread so it can't be a common term.

The original issue has been resolved.

Hi Rick,

When you go to open your file in Mastercam, select it and then hit the "options" button. Make sure "Edge curves" is selected. Note that not all filetypes have this option, I know it works with .STP, .DWG, .X_T, but not .IGS. If you've already opened the file in Mastercam you can select "create > curve" and then either "curve on one edge" or "curve on all edges." I've recorded a short video showing how to do so, I used X9 but it should be the same in X8: http://screencast.com/t/mov2rw5Qg2

With "create curves on all edges" what I did was select the command, then I hit "CTRL + A" to select everything, then hit enter. Someone else might be able to show you a more efficient way to do what you need but this should get you started! 

Hello Steve,

Thank you for trying to provide solutions to people experiencing this difficulty. However, I have removed the link to the HLE install file. It should only be distributed by Mastercam Partners to their customers.

Hello Rocky16,

Could you send me a PM with your SIM# or the name of your reseller?

Hello Scott,

I'm glad this all worked out in the end! If you ever need anything else, feel free to write!

Hello Scott,

You can send the screenshots to [email protected] and we'll take a look at it!

Hello Scott,

Would you be able to send me some screenshots of your software highlighting these difference?

One more question, are you using the Mastercam Home Learning Edition/Demo Software when you go through the books or are you using it on your own licensed seat(s) of Mastercam? Could there have been any changes to the default configuration? Finally, which operating system are you running?

Hello Scott,

I just want to make sure I understand the issue correctly. Are you saying you have the X9 Mill Advanced eCourse (under a different account I'm guessing, I can only find X7 and X8 Mill level 3 eCourses under this one) and the X9 Mill Advanced Training Tutorial in printed form. The contents of the X9 Mill Advanced printed book differ from the X9 Mill Advanced eCourse?

Please limit discussions in this thread to the topic at hand. Off Topic discussions belong in the appropriate sub forum.

The problem at hand appears to have been solved and the purpose of this thread has been met.

This thread appears to have outlived its usefulness.

Have you tried getting in touch with Brian Cerkas?

Hello,

If you're just starting out with Mastercam your best bet would be to begin with our Mill level 1 Training Tutorial, you may purchase the printed version here: http://www.emastercam.com/board/store/product/707-mastercam-x8-mill-level-1-training-tutorial/

You can also purchase a PDF version of it here: http://www.emastercam.com/board/store/product/726-mastercam-x8-mill-level-1-training-tutorial-pdf/

Hi curious-n00b,

Could you send me a PM with your SIM number or the name of your reseller?

Hello,

Are you familiar with how to us regedit to edit your registry? Which version of Windows are you running?

Hello,

What sort of things are you looking to learn in Mastercam? 2D mill, 3D mill, lathes, routers, etc. All of our Mastercam X8 books can be found here: http://www.emastercam.com/board/store/category/161-mastercam-x8/

If you tell me what you want to do in Mastercam I can direct you to the appropriate books that would help get you there.

All of our X8 books include a copy of the X8 Home Learning Edition/Demo software. It will expire this summer but if you purchase your materials through our online store you will be able to download a newer version to use instead. 

SIM# checks out so I've unlocked the thread.

SIM checks out, unlocking this thread.

Short answer is they're a group of friends that like to advertise their friendship. However, as this is an off topic discussion the thread will now be locked.

  Hello newbeeee,

I just did a test and copying a workspace file from a coworker into my \Documents\my mcamDemoHLEx9\CONFIG folder allowed me to load it up in my copy of the HLE.

Hello,

There was an issue related to permissions for members of the old eMC Learning Group. You should be able to access it now!

Mystery solved! There was an issue for permissions related to people who were part of the old eMC Learning Group. Everything should be good now!

Interesting, what happens if you go to the category? http://www.emastercam.com/board/files/category/32-mpmaster-all-versions/

Or go directly to the X9 MPMaster download page: http://www.emastercam.com/board/files/file/1088-mpmaster-master-g-code-post-version-x9/