Mastercam X8 Preview – 2D High Speed Toolpaths July 2014 http://www.inhousesolutions.com/training/webinars/

I did it, I see the program on usbmem but I can not enter them, when I do input programm the bottom right corner, I see the "input" but programs do not enter to cncmem

Can somebody tell how to enter the program from the usb flash card in cnc machine Fanuc 0MD http://www.mtbtech.net/blog/2012/10/25/Using-USB-on-a-Fanuc-0i-D30i-Series-Control.aspx Program are displayed but I can not enter into the machine

3d model Mini Mill Haas & Haas vf1 https://grabcad.com/library?page=3&time=all_time&sort=recent&query=Haas

Hello everyone! Have tool - Taegutec dxf files? where I can download them, I need Taegutec TFM43OFS 780-27R-05

Thanks for the help Mhoppe, tomorrow I will test the machine. CIMCO shows as it should

Somebody can help - create a calculation step to Z -circle mil % O8888(CIRCLE MILL) #1=15 (# TOOL) #2=1500 (S TOOL) #3=500. (F FEED) #4=20. (DIA. HOLE) #5=0. (X) #6=0. (Y) #7=2. (RETRACT) #8=0. (Z START) #9=-10. (Z END) #29=#8+#7 #30=[#4/2]*[-1] (-R HOLE) #31=#4/2 (+R HOLE) #32=#3/2 (PLUGE FEED) G21 G0 G17 G40 G49 G80 G90 T#1 M6 G0 G90 G54 X#5 Y#6 S#2 M3 G43 H#1 Z#29 G1 Z#8 F#32 G41 D#1 Y#31 F#3 G3 Y#30 Z-.5 I0. J#30 Y#31 Z-1. I0. J#31 Y#30 Z-1.5 I0. J#30 Y#31 Z-2. I0. J#31 Y#30 Z-2.5 I0. J#30 Y#31 Z-3. I0. J#31 Y#30 Z-3.5 I0. J#30 Y#31 Z-4. I0. J#31 Y#30 Z-4.5 I0. J#30 Y#31 Z-5. I0. J#31 Y#30 Z-5.5 I0. J#30 Y#31 Z-6. I0. J#31 Y#30 Z-6.5 I0. J#30 Y#31 Z-7. I0. J#31 Y#30 Z-7.5 I0. J#30 Y#31 Z-8. I0. J#31 Y#30 Z-8.5 I0. J#30 Y#31 Z-9. I0. J#31 Y#30 Z-9.5 I0. J#30 Y#31 Z-10. I0. J#31 Y#30 I0. J#30 Y#31 I0. J#31 G1 G40 Y#6 G0 Z#29 M5 G91 G28 Z0. G28 Y0. M30 %

@gcode I mean only rotates toolpath - surface, line, solidmodel not rotate

Why in X8 simulation axis rotation occurs without model ?

You can still try the standard Active Reports(setup sheet) & mill.set

Create cycle time in the NC file,using the postprocessor http://www.emastercam.com/board/topic/74520-cycle-time/?p=874448

Thank you Greg for answer

Hello! Please,tell us how it is create in Mastercam? on 10 minute http://youtu.be/GlG9wMAOI9c

MPFAN.txt

Yo need --------------- tool_info : 0 #Output tooltable information? #0 = Off - Do not output any tool comments or tooltable #1 = Tool comments only #2 = Tooltable in header - no tool comments at T/C #3 = Tooltable in header - with tool comments at T/C tlchg_home : yes$ #Zero return X and Y axis prior to tool change? In pretract delete "X0." And add in pheader$ # as said JMC

See how it work in mpmaster in misc reals #1 3=HPCC http://www.emastercam.com/board/index.php?app=downloads&showfile=622

It would be nice to see it on the basis 1_3AXGEN_VMC and Generic Fanuc 3X Mill.pst how use sim code

For the multiaxis - use only 4 axis for programming in Mastercam. If you do this in the postprocessor, the part geometry will be wrong In the postprocessor can do this only for indexing

Earlier the video was on youtube "Building a virtual machine for simulation - Karlo Аpro", then they deleted it...

AXIS SUBSTITUTION - ROLL THE GEOMETRY http://www.emastercam.com/board/index.php?app=downloads&module=display&section=download&do=confirm_download&id=652

http://gmccs.de/?page=downloads.php&dl_grp=8&pt=X% 2B + Инструмент и загрузка

How long does this impeller manufactured ?

del

HEAVY METAL You did that? It looks Very nice! I saw it here http://instagram.com/cncmachining