del

15042 - Number of steps

Hello everyone ! Is it possible to do? pictures with the views automatically were inserted into the. doc file

http://www.youtube.com/watch?v=L5LgYd9j3MQ

...Delete

Maybe in misc integers 10. "Secondary axis [0=off, 1=Pos, 2=Neg]" mi10$ = 2

Many people say that to me too rough 3+2 and finishing use 5 axis. Thank you MillMan for the answer.

I mean how to turn on area roughing to clear all areas of the model in Paralel to surfaces & Morph beetwen 2 surfaces and how it work? http://zalil.ru/34890303

it was made in China and it was a convert to 5-axis I'm interested in multi axis area roughing

Hello everyone ! People who use multi axis toolpath, can you tell and to explain how to apply the rough area in muliaxis toolpath or tell me where I can read about it ?

I use this settings in Generic Fanuc 5X Mill #Primary axis angle description (in machine base terms) #With nutating (mtype 3-5) the nutating axis must be the XY plane rotaxis1$ = vecx #Zero rotdir1$ = vecy #Direction #Secondary axis angle description (in machine base terms) #With nutating (mtype 3-5) the nutating axis and this plane normal #are aligned to calculate the secondary angle rotaxis2$ = vecz #Zero rotdir2$ = vecx #Direction and [CTRL_MILL|GENERIC HAAS VF-TR_SERIES 5X MILL_JOEY] [misc integers] ....... ....... 10. "Secondary axis [0=off, 1=Pos, 2=Neg]"

Thanks for the answer, I created a simulation table without movement in Z. While that works well

Yes)

Is it possible to create in machine simulation - movement of the table and the spindle goes together if Z - table goes up, spindle goes down

Thank you! I will be try different methods to get a good result

Thank you Millman! But I am currently interested in: 1) the load on the tool 2) what tool to use - with a radius or not 3)I really want to learn how to do them with one tooth

You mean like this? http://zalil.ru/34880823 Can you make a video how it looks on cnc machine ?

Maybe it will help you http://www.mtbtech.net/blog/2012/11/09/FANUC-AI-High-Speed-Modes-Simplified.aspx

Sorry !

I'm interested in what you would like to see in the new versions of Mastercam ? I would like to see - the trim to stock in 2d operations and roll surfaces

And try this xxxxor8055.zip for V9

Maybe this will fit http://www.mastercam.com/TeachersStudents/EducationalDownloads/Posts/posts/X5/xxxxOR%208055%203%20AXIS%20MILL%20X5.ZIP I just have not worked with xxxxor and do not know what his G codes

Thanks Gcode !

how to rotate table in Generic Fanuc 5X Mill