DavidB
-
Posts
4,242 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by DavidB
-
Yes I type in the Imperial Taps OD and pitch into metric values. But it would be good if you could also select Imperial taps from the drop down list. Same as if your running MC in Imperial and you'd like to select a Metric tap Cheers
-
Hi guys Im running MC in Metric. When I select a tap from the drop down menu is there a way I can also pick imperial taps. My list only shows metric taps?
-
Using the above method setup sheet how do I capture a screen shot and customise the header? Thank you
-
^^^ Thank you
-
-
Make sure in Level Manager the Display is set to USED not Named
-
Reply from QC Hi David, Thank you for contacting us with your findings with 2D Dynamic and using a Chamfer mill. This is now logged as R-18085 with your information so the developers can take a look. A possible work around is to still use your Chamfer mill but label it as a radius tool with a .8 radius when programing. This is giving a clean floor. I did test this back to X7 and it appears this problem has been with us since then and maybe before then. Regards, Curt
-
I believe there is bug in MC when using an endmill with a corner chamfer. If I just change the toolpath to use a square endmill it cleans the floor. If I use a an endmill with a 0.5 chamfer corner the floor does not clean up.
-
2D Dynamic is not fully cleaning the floor of the part. I have tried different step overs from 25 - 50% it just changes where stock is left.
-
I just did a windows 10 update and now MC seems fine. Thank you
-
Hi guys I have a strange one today when I start MC it hangs for ever starting up and it says allocating memory at the bottom of screen which I have never seen before. Also closing MC takes for ever?
-
Don't use Hybrid its not working since MC 2018 The hybrid recutting is a known defect logged as D-08446.
-
The top has say 40 tools which are used in the entire MC file. But I want a tool list for OP1 which uses just 15 of these tools? Thank you
-
From QC This has been previously logged as R-17223 and upgraded to Defect D-35348.
-
I have 5 different OPs in my MC file not all OPs use all the tools. If I do a tool list threw the tool manager it creates the entire tool list. I just need a tool list of the Ops I want to run.
-
I had it in 2018 and its still there in MC 2019
-
Is anyone else seeing that Hybrid cuts the part twice?
-
When creating a Tool List in MC is there away to get the tool extension to be out put? Cheers
-
Just finishing toolpaths can you tilt the tool?
-
I updated MC to the latest Maintenance release. Under the Holder tab I check Collision Checking. Why is Tilt to avoid Gouge Greyed out. Yes Im using a 5-axis machine def.
-
Reply from QC Hi David, Thank you for sending this in. Taking a look a Point Dimensions values not updating when rotating this appears to be an issue when rotating around the active WCS/C plane with the Transform Rotate and Transform Dynamic functions. Moving the gnomon on these functions away from the WCS/C plane should correctly update the values. I have created a request and will be closer looked into by the design product owner. Request # R-17291
-
If you transform move the part the dimensions update
-
I have a dimensioned part in 2019 I rotate it and the all the dimensions do not update? Original part Rotated part
-
If you DO NOT hit the apply button and just click the Green tick the tool paths do not get corrupted. Reply from QC was the fix will be at the end of August.
-
My posts are from In-house I cant edit them
