Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Done! Thank you to everyone for their help.
M50 X 2 (3 start) Internal thread - thread milled using a single insert. (Lathe boring bar and Insert)
Programmed a 6mm pitch and transformed rotated the tool path twice at 120 degrees.
Cheers
Thread is M50 X 2 (3 starts)
I have programmed a single point insert to thread mill a 2mm pitch at 0,120 and 240 degrees.
I will cut it today and see how it goes.
Thank you
I have asked the tooling reps and Im waiting for an answer.
Does anyone know if the Internal thread mills can do a multi start thread?
Or will I have to use a single point tool.
Hello I have to thread mill an internal thread with 3 starts. How can I do this? Thread mill only has one start
Do I have do 3 tool paths starting at 0,120 and 240 degrees?
Cheers
Im trying to engrave just a sequential serial number.
The number must be 3 digits.
001, 002, 003, 004 etc.
I can get sequential numbers working 1, 2, 3, 4 etc. but how can I get the leading zero's?
Thank you
Controller is the 630
For roughing I've used half of the cut tolerance and roughing and the machine fly's
I haven't tried the angular tolerance.
With a 2 degree tolerance for 5-axis does that mean the machine can position within a 2 degree tolerance?
Hi guys we just had our new DMG Mori DMU 50 delivered.
In mastercam I can set Cycle 32 values.
If someone can give some values they use for roughing and 3D Surface finishing I'd appreciate it
Cheers
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.