Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
thank you
I had all of them changed less than a year ago, I don't know why, could it be because I am only running 10 hr shift? Anyway, thanks for your helps, service will be in soon.
thanks
Allen
Hello everyone
I have an alarm # EX502 It's " Magazine servo battery low" Could anyone explain what's that? How do I cancel it? is it related to CNC memory? which is really scary, I tried to call Fanuc, but they are still closed now.
Thanks in advanded for your helps
Allen
James,is it complicated to adjust the parameters to smooth that out? when I first got the machine (OKUMA-HOWA), there was scary grinding noise when I turned the G05 P10000 on, It took 3 guys from Fanuc to fix that problem, I asked them about the jerky G00, they were reluctant to answer that question?!?! finally they told me to slow down the rapid between cuts! to 5 or 10 %, the toolpath with a lot of retractions,it seems to take forever, I don't have the bell-shape acceleration, what parameters should I adjust?
thanks for your helps James.
Allen
Oh Sorry John, I missed it, it's G05 P10000 and G05 P0 to cancel it, I had worked on some older Fanuc controls, it's ok with HPCC but with this 16I I have AI HPCC flashing??? and very jerky G00 movement.
Allen
thanks all for the helps, I'll test it tomorrow.
What's the difference between HPCC and AI HPCC? The issue here is with the G05 P1000 turns on(Fanuc 16I), I have very aggressive rapid movement. Is it the same for other controls? I tried on the OKUMA control with HPCC(not AI HPCC) it's pretty smooth with G00 movement. Can anyone shet a light on this?
Thanks in advance
Allen
Hello everyone
To merge a file, is't ok, mastercam takes in all the the properties of the file to be merged like levels, colors....but they all appear with the same color, I have tried to analyze them, changed color ...but no luck, they all have unique graphic color, it seems to take in the current system color, how could I change them to the original color?
Thanks in advanced
Allen
Hi Peter
I tried the sample MCX, did not change anything, just regenerate the operation and still have the same error, I'll take a closer look tomorrow, what I think with the demo version is the default operation not included operation for HST? Not so sure about this, anyway thanks for your input Peter
Allen
reluctant to bring this subject up again!
I got a MCX demo from in house, installed it at home, I tried surface high speed toolpath,to generate to toolpath, I always have this error " unable to detemine a valid machining zone-no toolpath create" I also brough up a sample MCX file, It works fine until I regenerate the toolpath, the same error occurs.
Can anyone shed a light on this?
thanks in advance
Allen
I spoke with in-house today, the shortcut option will be in MR2 and....it'll be 6 months from now! Oh man, I miss the C,E,Q... in V9 when it comes to select something.
Allen
A big thank to Thad and Andy it works!:-) I never tried it before, I'll have more control in contour than in spline, It would be better if I can break the spline at a location of my choice, like intersection, midpoint,quadrant....but it workds better than I expected, once again, thank you very much
Allen
hi Thad
what I did was, Edit-Simplify, pick the spline (just a rectangle with 4 rad)tolerance .0002,the other option to " delete" old spline, hit Ok, nothing happended, the spline's still there
hi all
I did exactly what you said, edit simplify....I got the message " no splines were converted" it's been like that since V9, some of the splines can be converted, some can not, any ideals?
Thanks
No, I don't have any add-on prior to MR1, you are right Trevor, the start up give me a serie of error with *.mtp, could it be the engraving add-on, when MC reseller mistakenly installed it? I don't have the code to run it anyway, can I just use system restore, and resintall MR1 again?
I recently updated from X to MR1/SP2, when I open MC, there's a message " Error reading dialogue...." Can anyone tell my what is it? Do I need to call MC reseller to let them know? Is it safe to run it? I am working on a 3D core,I don't know welding very well!
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.