mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mig
-
Hi John, Looks like I i can’t fix my previous post and take off this strange sights . (btw in mastercam editor they representing like bunch of squares) so I decide to start post from scratch Regards
-
Hi, Is it possible to force converted from v9 post use mp.dll v10 And another: were I can take master mill VX post with max and min + stock left comments? Regards
-
thank you Jhon , I wiil go thru it now.
-
thank you John I will go thru it now
-
Looks like "preadbuf5" cause this problem, If I deleting this word problem disappearing, but I loosing min ,max numbers also. Anybody know what this command does? And where is this buffer5 ? My converted from v9 post also has this word, but working fine only match slower
-
Ok guys, Thank you very match for response Let me try to play with it. Regards
-
Hi john316, Here you are : fmt X 2 x_tmin # Total x_min fmt X 2 x_tmax # Total x_max fmt Y 2 y_tmin # Total y_min fmt Y 2 y_tmax # Total y_max fmt Z 2 z_tmin # Total z_min fmt Z 2 z_tmax # Total z_max fmt "Z= " 2 min_depth # Tool z_min fmt "Z= " 2 max_depth # Tool z_max
-
Sorry debuging not working. Should i chenge somthing in the post?
-
thank you John. Let me try to look it. regards
-
Hi, This is part of Code from my post for okuma. ---------------------------------- (PROGRAM MAX: Z.25") (PROGRAM MIN: Z-1.98") N1 M1 €€€€(OPERATION MAX: Z= .25") (OPERATION MIN: Z= -1.98") (STOCK: XY= 0.|Z= 0.) ------------------------------------------------- got some strange symbols which I can’t take off, Anybody new what this is and how I can take them off? Regards
-
Thank you guys,
-
Hi, I trying to create my own tools by editing existing tool library, exactly like I did in ver 9. Basically I changing name of the tool and speed and feed (for example 1 inch iscar insert cutter),but when I saving this tool to the library , it appear some where but not at place where I expecting to see it . I sort it out by diameter it came out mixed end end mills and drills ,I sort it by type-diameters is mixed . Any one has solution for it?
-
Hi, Thank you everybody for reply. John, your advise is right. It working. Can you explain me why it works by this way? Is it bug? Steve, my setup was right. Regards
-
Steve i know? But why when i opening (converting in v9) igs file my settings is change?
-
Hi! When I opening new file all my settings appears in way I want. But if I open igs file , my default tool library (for example ) is change ?! So by opening igs file i call another (default) .mmd file. Is there some additional setups for it? Or i missed somthing . Thank you in advance
-
Hi, After converting tool library from ver 9 to X I can’t sort tool by way it was before in ver 9. Tools was sorted by type and by diameters inside of type of groups. Now I have total mess . Is this because is library converted? Is it possible sort tools out on way it was before or I should start create new library again? Thank you
-
Hi Mick, can you write example of G-code?
-
yeas i did
-
thank you John
-
Thank you John again, i tried to do it......it doesn't work for me. can you describe how to do it?
-
Hi! I can't I wont to change color only for arks with same diameter. Is it possible to do on X? On 9 it was all – mask – same as . Thank you
-
Thank you John, of course X
-
Hi everybody, How to make active particular tool path group? Is it possible?
-
Thank you John. This setings i have already.
-
Hi I am starting to use X now. For now I am using converted post from 9. Works OK so far , but taking long time to post even small operation. I understand , converted post is not a best solution, but I have no time to create new post now. At least I wont switch over Please advise if there is way to speed it up. Thank you