Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Hi ,
This is the bug or wrong setting for mpmaster for x2:
I am trying to machine arc 1 inch dia by 3/16 dia em.
Here is g-code from mpmaster :
G41 D3 X-.3903
G03 X-.4278 Y1.0462 R.0375
Z-.1 I0. J0.
Z-.2 I0. J0.
X.3827 Z-.25 R.4052
X-.4278 R.4053
X.3827 R.4052
X.3452 Y1.0837 R.0375
G01 G40 X.3264
regards
Hi!
Working on the new okuma post wich created from mpmaster x2.
When I trying to use this post with my old “okuma.mmd” and “okuma.control” files time for posting much longer then if I use same post with orig. mpmaster.mmd and *.control files.
Really appreciate if some one can help me with this issue .
Regards
Hi ,
Spent 4 hrs to modify my post for X2.
I am trying to pull out Z min and max volumes .
Actually it working but if I using several tools it puling Z min from the last operation only.
I know I some were really close but cannot find were is my mistake.
So I give up and asking post gurus to help me with this.
Any information will be appreciated
Thank you in advance
I trying to slice my part.
I had created a new view and all WCS, C and T were active with a new Zero point.
When I went to pick the Z height the value was
calculated from my original WSC zero.
Anyone know how make things right?
Thank you in advance
Hi,
How to convert post ( *.pst file) created with particular mach. def and control def files for using with different set of these files ?
Thx in advance
Hi John,
I not getting any errors, Just getting comment stock value =0,
Funniest that i converted this post 3 times on different computers and each time output is different.
Hi,
This is part of post for ver 9 were taking stock value from:
pstock # Comment amount of stock to leave
spaces=0
if (opcode=13 | opcode=14),
[
pbld, n, pspc, "(TOOLPATH - ", *stoper, ")", e
pbld, n, pspc, "(STOCK LEFT ON DRIVE SURFS = ", *stock, ")", e
if check<>0, pbld, n, pspc, "(STOCK LEFT ON CHECK SURFS = ", *check, ")", e
]
spaces=0
if (opcode=2 | opcode=4),
[
pbld, n, pspc, "(TOOLPATH - ", *stoper, ")", e
pbld, n, pspc, "(STOCK LEFT ON X&Y = ", *stock2dxy, ")", e
pbld, n, pspc, "(STOCK LEFT ON Z = ", *stock2dz, ")", e
]
spaces=sav_spc
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.