solution - restart mastercam. Probably to match experimenting Thank you everybody

If some one has experience with next: x-form - offset contour – then I am chaining- no dialog box ,it automatically minimized ? Should I change setting somewhere: regards

Ok Steve, thank you for the tip

Thank you guys .

Hi everybody, This problem was in mr1, now I found same thing in mr2: If I mistakenly rotated solid (for example), I can't bring it back!!!!? This bug, I guess which should be fixed long time ago. Frustrating

ok John, Thank you for the answer have you good weekend regards

Sorry, What is it "SetupX+_MR2 "?

Hi ! Is it possible to change precision in X/Y/Z ranges?

Lee, look for this for example. http://www.emastercam.com/ubb/ultimatebb.p...t=005965#000000

I never use filter from time I got gouge and found that bug was in ver 9. Is it was fixed ?

Looks like i solved problem. Setting - Config - start/exit- constraction plane must be 3d. thank you everybody for replay. Going for the next steps

Nothing helps so far. B/box coming flat. Shape- rectangular. Tabs XYZ gray, so i can't use it. I 3 times tried to switch on X and each time dropped because some weird stuff.

Hi! Trying to create rect. boundery box in X mr2, It doesn't work for me for some reason. I do : create- b/box.- all entet.-stock Kind of frastrating Thank you in advance

I am using vericut 5.2. Is it possible to run 5.2 under mcx interface? Regards

Looks like west world become crazy. Fight against own farmers, against own industry and illegal immigrants legally striking on streets for the rights.

I agree with John Paris Manufacturing in NA is dying .

Hi Cadcam! Thank you for the answer and I am sorry I probably heart your feelings. I know my English is not perfect and I have spelling problems. Unfortunately when I came to Canada with 2 children I did not have the time for languish lessons. Basically I didn’t speak English at all this time and one of the kids was 2 years old only. So I had 2 choices go on the welfare or to work as it is. So I choose second. Now both of my kids (that most impotent for me) speaking and writing perfectly. One is in university graduated second in grade 8. And I am what it is. And BTW I can fluently speak and write on two foreign languishes. Best regards

Hey guys. I nicly surprise for such of quick responce. I did resurch . I know that Radeon is not best for the mc but it works fine on my dell loptop with min slowing down hard. acceleration so far. So i try ,sorry, to be chip, just bougt my own house and tight with cash now. Best regards to everybody

Hi ! I look forward to buy new dell It comes with 256MB PCI Express™ x16 (DVI/VGA/TV-out) ATI Radeon™ X600 HyperMemory [included in Price] vidio card. If anyone have an expir. with this piece of hardwere? Thank you in advance.

Hi . Just interesting what technique you guys using to find smallest rads to use proper tool or for remashining when you cut complicate parting line or so ? Best regards

Hey guys ! Thank you for response. ---------------------------------------- Can i ask why you want to run the machine without a tool in it?. ---------------------------------------------- Because if the is no tool in the pot you ask, it stops to do tool change right on the meddle of cycle and no alarm. beej , where lockated this sensor?

I run this mashine for 2 years , it was working till now.

Yeas DavidB you are right

Enybody has this problem with vmc okuma mc4020 with through coolant system: Spindel is not rotate when empty. regards

----------------------------------------------- You must see scallops on the wall. It better for insert to feat in. ------------------------------------------------ Ok, trying to explain. For finishing pockets We using GARR TiAL coded cutters now (We don't have any another). Finishing cutter must be run out NO more then .0005" . Also i am clearing corners of pocket with .002-.003" before finishing. Rough pocket by insert cutter with .005". Then by finisher i am making semi finish cut, leaving stock .0015-.002"(don’t forget dia of cutter usually smaller aprox. .001 then nom. size).Then check actual size of pocket , making some corrections if need and finishing pocket. RPM i am using 700 , feed 13. (Take chips out from the cutter ) Wall of the pocket looks nice but not as a mirror. You can see like a scallops about .0002" on the wall. Best regards