mig
-
Posts
852 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by mig
-
Is mr2 will be faster ?
-
Crash.....not the application.....Machine
mig replied to Keith @ Solid Code Solutions's topic in Industrial Forum
I have problems with Operations meneger also. My all geometrys and operations just gone. -
I am using post updated from ver 9 I created this post from Mpmaster long time ago . It works fine so far. New Mpmaster had "full arc problems" , so i gave up so far
-
Forged Diemaker for Thermoforming?
mig replied to Troy Gossett Indepak Inc.'s topic in Industrial Forum
Hi Troy, Try this guys : Innovative Tool & Die INC. #17 - 7449 Hume Avenue Delta, BC Canada V4G 1C3 Phone (604) 946-1622 Fax (604) 946-1567 or email at: [email protected] they are good Regards -
v9 mr*** more stable and in lot of cases faster. Yeas, this(v9) is the past and i am using x2 now . Make me sick sometimes.
-
thank you very mutch doyleg
-
Hi, Anybody can tell me how to lock snapping on center of arc when I selecting holes for drilling? I mean how to lock override button ? I know there is some hot key for that . Thank you in advance
-
Hmmm, When i use to run vericut ver 5.2 under mastercam 9.1 interface it c-hook creating block by stock set up in mastercam job setup. Also when i trying to hit Ok after all preporation is done , masrecam just kicking me out. regards
-
Hey Doug , Thank you for replay. Can you verify on vericut against block , not "stl" file ? regards
-
Hi , Anyone get fully working vericut 6 .X under x2 interface? New releases coming for both but looks like problems still not fixed. Thank you in advance . Regards
-
Easy guys , Peace
-
hey arc1234 , if they shaw people real list you asking , who going to buy this product ? I would ask to some one who know, if Solidcam has same problems?
-
hey Eric , i started to use X 3 times , and each time went back to 9 , looks like i going to do this again . X has lots off new cool stuff("alot of cool useful features" ) but not working properly . Frastrating
-
This BUGS was reported long time ago and never geting fixed .
-
How many people are having duplicate tools created upon coping a operation??? Is ther a bug report reference number?? This is a hard error to duplicate as it seems to happen periodically and is not instilling a lot of continued faith in the stability of the software. This has been going on and never seems to get fixed and I know I'm not the only one that is having this problem. The Operations Manager seems to have never been completely stable and has tried my patients too often and still with no resolution in sight.
-
Yes Keith , That what i mean . Thank you for correction. Sometimes cheap (over sea) labor cost much more. Regards
-
Yes i am
-
Looks like people not complete satisfied by Mastercam X , so they start to look on side . This how it works : Chip fish , bad sup. Regards
-
This "Experience" came accidentally when i used to edit my writing. I am sorry
-
Hi,Experience First , long time ago i found kind of math problem in okuma if you using negative value of offset .I just followed numbers (positions) in single block mode. You can avoid this problem if you using tang. line setup in lead in , lead out enter/exit . regards
-
Good morning, Zip file on ftp now ftp://www.ppcadcam.com/Mastercam_forum/MCX2_Files. File name: bb_problem.zip BTW , when i created surfaces from solid i got two extra surfaces also . Regards
-
Ok , It did Ok on solid model , wire frame to, but failed on surface model . I am using this features all time and what really scare that it failed from time to time , when you not expected.
-
I nearly F#$ked-up the really expensive part just now! Why is it that every time a new version comes out, there are features that work just fine in the prior release, that are now problem-matic. How can anyone be expected to trust the software or the company that has created it/tested it, especially when it can’t even make a simple Bounding Box. I saved my file as mc9 and check this feature on ver 9 , works JUST FINE on same model. Regards
-
Thank you guys for replay, I playing with HSM tool path now and unfortunately can’t find way to plunge by way I wont . I always using this option in rough pocket tool path (were it necessary of course ).
-
Hi, Just wondering, how possible to “plunge outside boundary” when you using HSM rough tool path ? Thank you in advance.