Jump to content

Welcome to eMastercam

Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.

Use your display name or email address to sign in:

Rob Dusenbury CAD/CAM CONSULTING

Resellers
 View Profile  See their activity

  • Posts

    204

  • Joined

  • Last visited

  • Days Won

    1

 Content Type 

Everything posted by Rob Dusenbury CAD/CAM CONSULTING

  1. Rob Dusenbury CAD/CAM CONSULTING
    What's up Jay the Ntma getting a little boring and your running out of stuff to teach?
  2. Rob Dusenbury CAD/CAM CONSULTING
    Joe, Set cutter comp to wear that way you will get a G41 or G42. Also for work offsets you need to go into T/C planes in the tool parameters page, you will see work offsets check mark it and put in a whole number. This will add to your E1 offset for example E1+1=E2 E1+2=E3 and so on. -Rob
  3. Rob Dusenbury CAD/CAM CONSULTING
    Make the min drill size as big or bigger than the largest drill you want use. That way it will pick the proper pre drill for your tap. I usually just put in 1" and it works great.
  4. Rob Dusenbury CAD/CAM CONSULTING
    Use the advanced settings and choose the Pre-drill tab.
  5. Rob Dusenbury CAD/CAM CONSULTING
    I'm sorry I did not see your second post. Looks like you tried analyze edit. You should be able to just type in start and end angles. Also if you right click in the input fields you get options that will allow you to pick of the screen.
  6. Rob Dusenbury CAD/CAM CONSULTING
    Try this select analyze then select your arc entity on the main menu you can turn on edit. This will allow you to change start and end angles, radius, center point, or any attributes. It sounds like this is what you are looking for. Hope it helps. By the way with the edit on you can do this with any entity.
  7. Rob Dusenbury CAD/CAM CONSULTING
    Joel I will be out there around 9am tommorow I will give you a call somtime today after class. Also I want thank you guy's for helping Joel out,He's new and his boss just through a bunch of stuff at him. Thanks again!
  8. Rob Dusenbury CAD/CAM CONSULTING
    It will be a upgrade on MCU not sure of the price they have not set that yet, but I do know that the cost will not be huge. It is pretty cool though I think you will like it. Jay are you looking for a demo too? Anything it takes to keep you busy I'm sure Tom S. will appreciate it.
  9. Rob Dusenbury CAD/CAM CONSULTING
    John, MetaCut is comming out with some pretty cool features For tool breakage and tool wear. You will be able to graphical set up where you want to restart the program and it will put in all your header requirements, Also they are putting in DNC communications right out of the editor. I can give you a demo of it in class if you like.
  10. Rob Dusenbury CAD/CAM CONSULTING
    How about Westec
  11. Rob Dusenbury CAD/CAM CONSULTING
    I only delt with the Instructor on Sat and I'll tell you from what I've seen he is awesome and I learned alot. Jay I have heard good things about the the north hollywood instructor too maybe I will check into taking his classes as well.
  12. Rob Dusenbury CAD/CAM CONSULTING
    Really what you know about the instructor in N. Hollywood. Is it as good as Ontario
  13. Rob Dusenbury CAD/CAM CONSULTING
    I've taken the ontario class many of times myself and highly recommend it.
  14. Rob Dusenbury CAD/CAM CONSULTING
    I forgot, this will from 8 am to 3:30 PM California time. Thanks for understanding after last time it was down. This is Jay by the way. I am using robs puter.
  15. Rob Dusenbury CAD/CAM CONSULTING
    Do you always have the same amount of stock around the part? What if you have more stock in X than Y? Then what your asking for won't work. It works in depth cuts because top of stock and depth amounts are consistant. I think the coolest thing to have would be Stock Recognition in Mill,that way you would never need to set top of stock and side passes would be taken care of. If you want to make a wish list that would be the thing to add.
  16. Rob Dusenbury CAD/CAM CONSULTING
    Just curious why don't you just type in 1.8025/3 in the spacing and let the system do the math. You can pretty much do any math equations you want when entering values in MasterCam. Just a thought.
  17. Rob Dusenbury CAD/CAM CONSULTING
    No Problem Happy to help.
  18. Rob Dusenbury CAD/CAM CONSULTING
    Importing ops from your library in the Ops Manager lets you bring in operations you like to use. Importing from the Job setup lets you bring in the entire job or portions of a similar job. The benifit of this allows you to bring in the same tools, matl,and stock. Nice for sister parts, Thats what its for.
  19. Rob Dusenbury CAD/CAM CONSULTING
    Use your Import through the Job setup.

Join us!

eMastercam - your online source for all things Mastercam.

Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.

Useful Links

Contact Info

Subscribe to eMastercam News

 

Legal

Privacy Policy

Store Terms & Conditions

Forum Guidelines

Follow us

×
×
  • Create New...