jagg2499
-
Posts
170 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by jagg2499
-
no i never worked at williams but i did used to work with rich at a place called turchan technologies in dearborn a very long time ago
-
actually they work pretty good i used to work for the guy that originally designed them and did lots of testing on them we used to just run them till they broke it is lots of fun to go thru thousands of dollars in tooling and not get yelled at for it but it depends on what type of material you want to use it in also
-
+1 to Thad I also think that would be a great addition to the software
-
Just a thought but do your have your coolant comands set up in your machine definitions to match the ones in your tool library
-
that worked perfectly thank you hardmill
-
I am trying to mill a helix with a key cutter and i can only seem to get the cutter to spiral down one revolution ...... any thoughts on what i am doing wrong?
-
Nevermind Figured it out ......... stupid mistake as usual
-
I think i screwed up a setting someplace because now whenever i post a file it has no size to it, i get no errors and everything appears to post correctly but when mastercam editor opens it is blank and has a file size of zero ...... any ideas X2
-
the web site tells you how to install X2 in the tech tips section so it must be close now there is only one thing missing !! ( hope they dont remove that now also)
-
Is there a demo available yet that has art and wire?
-
if you are trying to cut 2 different parts with 2 different wcs and the same tool check the force tool change button it will post a new offset for you
-
Ok so i was off a day but i was close at least
-
i read somewhere that if you have active maintenance on 8/31 you will get X2
-
i agree just set-up the lead in and out parameters. if you are still having a hard time put the file on the ftp site or email it to me and i will take a look at it for you
-
I live at 11 and gratiot and i grew up there i work in romulus now ......
-
Oh i live in Roseville What place if you dont mind me asking ??
-
were in detroit are you at Newchsmcam ??
-
Is the student version the same as the Design LT version??
-
I know this has been covered several times and from some previous posts it should work but does not seem to. When i adjust the tool changer cycle time in my machine set-up it does not change my cycle time. Any pointers on a way to fix this?? X mr2
-
There is a break button in the trim function
-
Very cool did not know that either
-
i did not recieve any fixes for the lt version is this something the reseller is required to give you and i should call them on it
-
why can't I get at the communications parameters
jagg2499 replied to Chris Rizzo's topic in Industrial Forum
communication - configure - port -
Hey Rob I would love any of that info you sent millingman. I just started doing some thread milling and would appreciate some tips. Thanks Mike
-
me too i currently have 8 open with no problems