Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Actually, I did the drawing a few minutes ago. Iv'e tried it many times and it still won't work. I tried saving it as an older acad file also. It must have to do with the mr2 install, because it worked fine the other day. I'll keep messing with it.
Hey guys, I'm trying to open a autocad 07 file. It doesn't seem to be coming in, if it is I can't find it. I did a fit screen and panned around. I just updated to mr2 and never had a problem before. I thought there was a thread the other day but I can't find it.
Thanks
It all depends on what you are doing, the big factor between the 2 is price. Pro-E is much more powerful with many options. Solidworks in my opinion would be a better choice for what most shops need. The learning curve with pro-e is longer compared to sw. SW would be my choice
my 2centz
mike
I am trying to move the part to 0,0, For lathe 2nd op I usually flip and move the part and give it a separate 2nd op file name instead of doing a stock flip in the operations. Now I can't get it to 0, when I select all and do a move from point to point it only moves in the x direction I need it to move in x and z. What I need to do is take the time and learn to use the WCS properly instead of using translate.
thanks for the help
Hey guys, a few questions
first, how do I get the axis lines to display on the screen
second, I was going to update to mr2 and when I use the update utility it does not offer mr2, my maintenance is current.
third, I am trying to use xform translate from and to with no luck. no matter what I do the part will only move in the X + or - direction, I thought I've used it many times with no problem
thanks for the help
Hey guys, whenever my screensaver comes up while in Mcam when I reactivate it says the hasp has come disconnected and I have to close and reopen. Would you guys know if this is a Mcam setting or a computer setting??
Thanks,
mike
yes that is correct as far as I know, obviously the main thing is to make sure the feed is correct, I usually double check feeds when I post or at the machine just to make sure they stuck
I already saved the new file over it. Also when I'd try to close it I got a message that there was a active command, there was not, then I'd have to do a ctr=alt=del
it's working o.k. now
thanks
Hey guys, I have a simple part I have ran before and it woked fine. I needed to change cutter size and when I do I says incorrect parameter and locks up. i redrew the file, a simple polygon 8 sided .250 deep. Now whenever I change DOC, multipass,lead in/out it does not show a dirty toolpath. When I try to verify it then says its dirty and doesn't seem to be changing anything?? still using MR1
I've never messed with the upper or lower turret on theTL-1. Always verify with tools on top and it works and posts fine, never had a problem. Personal preference and depends on the part I guess
I have a HP ZD7000, it always woked fine but, the motherboard already went out twice!! in three months. the first time it was 5 days from being out of warranty and the other time was just a few weeks out of warranty $$800.00 later. the tech I talked to said hp has been having major problems and there service is going down hill
beware of HP zd7000
I have a HP ZD7000, it always woked fine but, the motherboard already went out twice!! in three months. the first time it was 5 days from being out of warranty and the other time was just a few weeks out of warranty $$800.00 later. the tech I talked to said hp has been having major problems and there service is going down hill
beware of HP zd7000
I can't get mt threadmill path to cut to the major dia 3/4-16. If I select entities and arc which is my major it will mill at 0,0 and won't go out to .750 and the box for major is shaded. If I select 0,0 for the point it still won't let me enter the major dia. If I select the arc .750 dia then you don't need to enter the dia? right what am I missing? (my tool is defined properly) can someone list step by step for me the sequence to select the point or geo.
Thanks
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.