Cuda84
-
Posts
505 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Cuda84
-
I like that.
-
That would be the best use for the Ipad. Simple set up and double check toolpaths. Not processing toolpaths. It would be a great help in some shops. I would never take my personal Ipad into the shop though, it stays in the office.
-
Like pulling teeth if its not for the machines that run solidworks.
-
Nice to know about that Gcode, but it realy shows the limitations of my computer. I have a nice 20 - 30 second delay after picking the toolpath. Thanks
-
I just found this. it seems to work. The results match the minimum pitch diameter in the machinist handbook. H = Cos(30) x P H = is height of thread P = Pitch 2MM Dp = Dmaj. - 2(3/8)H Dp = pitch diameter I would just look in the machinists hand book. This formula was found on wikipedia.
-
A quick way would be to turn off the toolpath visability for all then turn on say 10 at a time to narrrow it down, when you see the one you want come on you know your close.
-
I guse im missing something. Change color>All surfaces>select Color vs. C-hook> find Change color.DLL> select color Seems like the same amount of steps to me.
-
It depends on what you are trying to do. Change the whole solid, YES. Change entity color< Solids< select solid. Certin solid faces, Idon't think so. You will have to select the faces themselfes.
-
Opening X_T file in X5 and the color attributes changing
Cuda84 replied to Odin's topic in Industrial Forum
Not a digital. -
Opening X_T file in X5 and the color attributes changing
Cuda84 replied to Odin's topic in Industrial Forum
Hardmill I understood what you were implying. -
Opening X_T file in X5 and the color attributes changing
Cuda84 replied to Odin's topic in Industrial Forum
PS: you can toolpath solids without the Solids option. You can't edit them in any way. This includes moveing them, im prety sure. -
Opening X_T file in X5 and the color attributes changing
Cuda84 replied to Odin's topic in Industrial Forum
Creat surfaces from solid. Go to creat>Surfaces>From solids -
Opening X_T file in X5 and the color attributes changing
Cuda84 replied to Odin's topic in Industrial Forum
If you read the parasolid as a solid it will retain the original colors. -
Go to solids manager and select the solid and clear colors. After you do this you will be able to change its color.
-
Yes just select all of the solids in the solid manager and clear all. Select the first solid, hold control, select the last solid.
-
just looked at there web site, don't they have anything smaller then 1/4"?
-
I'm not saying its an X5 problem. We have 2 seats hear and it only happens on my computer. But I though it was discussed before, and that someone might have an idea what causes this.
-
I think this topic has been discussed before, but I can't find it. Can someone point me in the right direction? The problem. After having Mastercam open for a few hours I get a significant delay (20 to 30 seconds)when I try to open the FILE drop down menu. The only fix is to reboot the computer. Rebooting 3 to 4 times a day gets old real fast. I thought it might have been an X4 problem, but it is still happening in X5. Any help would be appreciated.
-
That was not very nice Prosin Molds.
-
I have just tested the solid color options. I have no problem changing colors either the whole part or selected surfaces. Do you have use group colors turned off in your settings? if not make sure you turn it off.
-
Im not sure about the color yet, but I think the creat edge curves is off by default in X5. You just have to go to your settings and turn it on.
-
downloading....
-
Looks good
-
just testing
-
Trevor Its not a new problem. I saw this when Covert first got MasterCam (V9, X). I had Fastech hard code the G54 into the posts, so the post dose not get the info from the program or workplane it just always posted G54. Do you have a new post that you got after I left? If not it could have just got changed after running thru the update post 3 times since I left.
