How to move part to 0,0 ??

[Mike@Dive Lab Inc.]

Hi everyone, Somehow when I created my geometry I ended up with the center of the part around x-26.0 and y-20.0 Does anyone know how to move the center of the part back to 0,0

[Quickmike]

Transform/translate/between points.

[Thad]

Main menu-Xform-Translate-All-Entities-Between points select zero corner on your part, click Origin in the menu.

 

Welcome to the forum.

 

Thad

[Fralex_francois]

Xform/Translate/between points

 

Then select all entities then done, then select the point you want to go to zero then the origin, then done

(not sure if exact, cause not in front of MC)

this should do it...

 

Doh!! too slow...

[robk]

You could do as the others suggested, or you could use the WCS without moving any geometry.

BTW, Welcome to the forum

[cadist]

Transfromation is a very basic operation mike.May be if you want to create a point at the center of your job go to jobsetup and click bouding box. keep the option create center point on and click ok.

Lateron you can use that point to move your object to origin.

BTW welcome

[Storkman]

Mike,

Welcome to the forum. When you translate like the others suggested make sure your in a 3D constrution plane.

[Mike@Dive Lab Inc.]

Thanks everyone, it worked fine

[cadist]

Beat ya storkman,

Nice avatar.

[Storkman]

Thanx cadist