Mastercam version x

[MAKINOMAN]

I am looking for a POST for Mastercam version X......can anyone help me?

 

This is for a Makino E33

[Wise-ACR]

Contact your reseller.

[JohnW@Kauffman]

Welcome to the forum. You might try reading this

 

Forum Rules

 

This is a wonderful resource and a LOT of great people and knowledge here, but your first question may not get a response you'll like.

[MAKINOMAN]

not a very user friendly forum, delcam is user friendly...thank you

[Hardmill]

quote:

---

not a very user friendly forum, delcam is user friendly...thank you

---

Just read the rules bonehead.

 

Your lucky they were being nice.

 

 

PEACE

[Don S at Barefoot CNC South]

Maybe you can get your post on the Delcam forum then.

 

[MAKINOMAN]

I find this sad.....I will look elsewhere.....WEENIE

[Don S at Barefoot CNC South]

As they said Try your reseller!

[Don S at Barefoot CNC South]

Better yet modify a post, then you might get the picture.

[MAKINOMAN]

never mind...i got it off delcam...thznks for nothing Lynch Mob

[Hardmill]

quote:

---

I find this sad.....I will look elsewhere.....WEENIE

---

Now go find it somewhere else.

 

 

PEACE

[Mater]

I think it is a very friendly forum...if you read the Forum Guidelines and don't ask for a post as your 1st post.

 

duh

[MAKINOMAN]

you mastercam guys are really cool!!!

[Don S at Barefoot CNC South]

Straight from the delcam forum:

quote:

---

Posted: Tue May 22, 2007 1:43 pm Post subject: Mastercam version X......

 

--------------------------------------------------------------------------------

 

I am looking for a POST for Mastercam version X......

can anyone help me? Running on a Makino

---

And no responses?

[Kannon]

Here is a post if you need one..

I modified it a little..

[gcode]

quote:

---

you mastercam guys are really cool!!!

---

Your dealer can get you an off the self dialed in

Makino post for free. Is that a problem ???

[Don S at Barefoot CNC South]

Scanning the delcam forum and someone asked about apost and guess what they said LMAO:

quote:

---

Your best bet would be to contact your reseller, they will have it

---

[Wise-ACR]

Sounds like he's a Delcam plant from Birmingham.

[Kannon]

wanna see somefin funny!

[Cuda84]

Yeah we have DelCam products here. They tried to get the posts modified for zero editing. For drilling no less. $5,000.00++ later it's a good post now they only need to modify a couple of things after they post the program. I got my MasterCam posts modified for free. "ZERO edit", post and go.

 

The only post we had to pay for was the 5-axis post.

 

Good luck with that DelCam thingy.

 

[Don S at Barefoot CNC South]

LMAO

[Hardmill]

LOL Its says Delcam guru, those words dont go togther.

 

 

[Thee Rickster ™]

He prolly has a cracked version of X

[Guest]

i don't know anything about delcam,but i like the name.

[Thad]

I'm sure you're making the gang at Joint Venture Tool and Mold real proud.

 

Thad