What is the latest version of MC?

[Thad]

I started a new job today. We have X2 with maint. My version is listed as 11.2.3.28. Is that the latest?

 

Thad

[Guest]

Thad across the top ist should be listed as X2, X2 SP1, or X2 MR1, X2 MR1 SP1, or X2 MR2

[Hardmill]

I was wondering what happened to your avatar.

Go get em buddy.

 

 

PEACE

[Thad]

It says X2MR2, but no mention of a SP. I have a DVD in our documentation that says X2 MR2 SP2.

 

Thad

[gcode]

The latest greatest with all service packs installed should say

X2(***)

Build date (****)

Check this as well, especially if you use surface roughing toolpaths

 

EDIT.... my apologies.. both my version # and build date are wrong.. I'm running a beta version.

The patch check I posted is valid for a non beta X2MR2 setup

[Thee Rickster ™]

I have X2 Mr2

 

When I go to about it says X2(11.2.3.28)

(With patch 001 and 002)

[Hardmill]

11.2.3.28 (X2 Mr2) here, thats the same thing I got at home too.

 

 

PEACE

[Thee Rickster ™]

gcode, the link you supplied says after patch 2

install it should read 11.2.3.29

 

But mine and hardmill's read 11.2.3.28?

Are we good?

[gcode]

I jacked you guys up with my original post.

I'm running a beta version sorry

 

the link to the INFO box on the Mastercam download site is good

[Hardmill]

I have'nt loaded any patches here, too much trouble getting IT

to do it in a timely manner.

All runs fine as is.

 

 

PEACE

[gcode]

quote:

---

I have'nt loaded any patches here, too much trouble getting IT

to do it in a timely manner.

---

Sp1 fixes some tranlator issues.. if you don't have problems, it's no biggie

 

SP2 is important.. it fixes bad arc output with some roughing toolpaths.

[RandyN]

Thad,

 

11.2.3.28 is the latest, X2 MR2

 

Randy

[Thad]

Thanks guys.

 

Thad

[mayday]

Thad,

where you at now?

[Hardmill]

quote:

---

Thad,

where you at now?

---

:SLAP:

 

Dont be so damn nosey, if he wanted us to know he'd tell us.

 

Im sorry, did that hurt ?? :EYE GOUGE:

 

 

PEACE

[mayday]

quote:

---

did that hurt

---

no pain no gain

[chowquoe^]

 

This is what I am getting??

[MotorCityMinion]

Kudos to you if you found a decent job in Southern MI.