EZ TRAK

[Threept82]

Hi there MasterCam Gurus.

 

Where I work now. They have 2 older EZ-Traks.

 

I used to have the software to use on a PC.

 

Does anyone in CNC land know where I could get another copy?

 

The people at work use it as a Bridgeport with a readout on it "ONLY"

 

Please advise.

 

Thanks

[Threept82]

Really?

 

Nothing?

 

MasterCam forum is not what it used to be.

 

Sorry to see it go that way.

[RaiderX]

give it time. dont know your local but is 8:30 pm here and most talent is in the AM??

sorry dont have a solution for ya

[Jeremy Herron@DBS Solutions™]

I am sorry what exactly are asking for? An ez-trak post?

[Jeremy Herron@DBS Solutions™]

Double post.

[Matthew Hajicek - Singularity]

I used an eztrak a couple years ago. As I recall it took simple gcode. There was a conversational mode too but I ignored it.

[Hardmill]

PEACE

[Thad]

give it time. dont know your local but is 8:30 pm here and most talent is in the AM??

sorry dont have a solution for ya

 

That's the part you have wrong, lazyboy. The way this forum used to be, which is what Threept82 was referencing, was that you used to ask a question here and by the time you got back from getting a cup of coffee, you had 6 replies and 2 personal emails answering your question. And it didn't matter if it was Christmas Day when you asked it! Threept82 is exactly right, this place is not what it used to be.

 

Thad

[Brad St.]

Sample extrak code, still using our version from MC-9. As others asked what exactly are you looking for MMD's/CD's , post info....?

1. 0000 EZTRAK|SX 0 MODE|INCH |MON AUG 06 07:35:00 2012
   0010 || TOOLCHG T239
   0020 RAPID ABS X0. Y.25 Z.1
   0030 LINE ABS X0. Y.25 Z0. F6.4
   0040 LINE ABS X1. Y.25 Z0. F6.4
   0050 ARC|CNTRPT ABS CW X1.25 Y0. Z0. XC1. YC0. F6.4
   0060 LINE ABS X1.25 Y-1. Z0. F6.4
   0070 ARC|CNTRPT ABS CW X1. Y-1.25 Z0. XC1. YC-1. F6.4
   0080 LINE ABS X0. Y-1.25 Z0. F6.4
   0090 ARC|CNTRPT ABS CW X-.25 Y-1. Z0. XC0. YC-1. F6.4
   0100 LINE ABS X-.25 Y0. Z0. F6.4
   0110 ARC|CNTRPT ABS CW X0. Y.25 Z0. XC0. YC0. F6.4
   0120 LINE ABS X0. Y.25 Z.1 F6.4
   0130 || END|PRGM
   

[Matthew Hajicek - Singularity]

I think he's looking for an EZ-Trak program that runs on the PC, used for generating conversational programs. If so, I'd say skip that and use Mastercam. You can either use a post that writes for the conversational mode, or do what I did and just use gcode. The EZ-Trak does have the ability to load and run standard gcode.

[Guest]

I cleaned this up to keep it "on topic"

[Midwest]

Try.....

 

http://www.imarksweb.net/book/bridgeport+ez+path+software+update/

[Guest CNC Apps Guy 1]

Back in the day when help was plentiful, our help wasn't being used aginst us. I'm a LOT less inclined to help these days.

 

Just speakin' the truth.

[Hardmill]

Back in the day when help was plentiful, our help wasn't being used aginst us. I'm a LOT less inclined to help these days.

 

Just speakin' the truth.

 

No worries James, sphincter boy is prolly watchin as we type.

He already has another one up.

 

Guess webbys banning powers need an upgrade :frown:

 

 

 

 

 

 

 

 

 

 

 

PEACE

[Guest CNC Apps Guy 1]

When a gnat in Zimbabwe farts something that even resembles Mastercam, she's there to report it.

[Hardmill]

When a gnat in Zimbabwe farts something that even resembles Mastercam, she's there to report it.

 

Its ok i has my antagonizing suit on this eve

 

 

 

 

 

 

 

 

 

 

 

PEACE