New member

[Smitty]

Thanks mastercam for inviting me to this form.I look fordward in using the form in the comming months as we install our new vf6.

[Jimmy Wakeford from Barefoot CNC]

Smitty,

How is the "new "vf6 doing?

[crazy^millman]

Welcome to the Forum and think you will find this great place. I think you will be happy with the VF6. Get the one with LCD screen I think you will be happy. The MPMASTER on this web site works good with the HAAS. Here is the link: MPMASTER Link

 

Crazy Millman

 

[ 01-14-2004, 11:45 PM: Message edited by: Millman^Crazy ]

[Shady]

Welcome Smitty.....Hope you enjoy your stay....take your shoes off......sit a spell. ~~~~~~Shady

[KCollins]

welcome smitty....pull up a chair...the forum is definately one of the best resources around for anything pertaining to mad/cam and machining....just a note to the wise...might wanna read the FAQ if you get some time...some of the guys in here can get a little fiesty if you dont abide by the code of conduct....*cough* don't ask for a post *cough*... but more or less they're good guys...

 

[Code_Breaker]

Smitty, welcome to the forum. I have enjoyed what everyone has to offer. It has made me a better programmer. You will have the same, if not better, experiences. Enjoy

[ssibiski]

I would say welcome Smitty, but since the post date shows it haw been here longer than than I have been, I'll just say how it going.

 

Steve S.

[Brendan P]

Welcome Smitty.

And whatever ya do,should you ever recieve any "bonks" take them lightly.

[mold100]

What hes already got a haas post, I was beginning to think that stuff wasnt available.

[Smitty]

Thanks to those who replied to welcome me to the forum I cannot reply to all the e-mails I recieved but thanks guy's I know I don't be here much but I still would like to use this forum when I have a problem.

[Webby]

Jimmy dug up and old one! Check of the original message date.

 

Smitty is Member #16 - one of the original Canadian customers invited to essentially beta test the new forum when we went 'global'. He was set up long ago with a 5-Axis post for his Haas!

[Jimmy Wakeford from Barefoot CNC]

I thought it would be good to bring it back to the top. There was noone back then to welcome Smitty.

[Rekd™]

LoL, I was wondering what was up with that..

 

'Rekd

[Scott Bond]

This was fun and it was cool that Smitty

responded.

Let's do another?