Remote Access no SIM found

[#Rekd™]

Hi,

 

I have set my laptop up so I can access my Desktop from home. I am using OpenVPN software (mandated by the company here). It hooks up great and I can see both monitors etc. If Mastercam is already open I can access it but I can not start it up from scratch. It says no SIM found. I have a hasp plugged directly into the front of my desktop USB.

 

Any ideas?

 

Thanks in advance

[JAMMAN]

Good Luck

[Guest]

The driver does not support it.

 

When you try to launch, it wants to look at your local system USB ports.

 

If you "really" need to access from elsewhere, you'll need a Nethasp instead of a SIM

[#Rekd™]

JP would this work?

 

http://www.eltima.com/products/usb-over-ethernet/

[htm01]

you need http://www.gotomypc.com/remote-access/

works from any computer i can even start work MC from my phone

[Guest]

JP would this work?

 

http://www.eltima.co...-over-ethernet/

 

Never tried but knowing the way licensing works, I "doubt" it

 

html01 has it right, gotomyPC gives you control of that remote PC just like it was local

 

The only other option is leaving Mastercam open

[#Rekd™]

The company here will not allow gotomypc, has to be the VPN software that they provide.

 

Thanks guys!

[Guest]

Will need to be a Nethasp then John

[Brian B 74]

I have had great success using Hamachi from logmein.com. Requires a NetHASP though. No remote desktop. Creates a VPN to your work desktop and you can gain access that way. Best part - it's FREE!

 

BB

[JoshC]

Could we just make this simple and take the hasp home with you? Not sure if thats an option for you but if it is you can just install mastercam on the home computer and just bring the hasp home with you.

[JAMMAN]

Will need to be a Nethasp then John

 

 

That doesn't work. I have nethasp and get sim not found during RDP. I even had help from my dealer on custom launch scenario, no go. If anyone is really doing this with windows RDP and a net hasp it would be cool if they post specifics.

[CJep]

Could we just make this simple and take the hasp home with you? Not sure if thats an option for you but if it is you can just install mastercam on the home computer and just bring the hasp home with you.

 

That works great,... until someone forgets their hasp at home, most companies have a policy concerning license keys, leaving the premises

[Guest]

That doesn't work. I have nethasp and get sim not found during RDP. I even had help from my dealer on custom launch scenario, no go. If anyone is really doing this with windows RDP and a net hasp it would be cool if they post specifics.

 

I had many customers doing just this when I was working for a reseller

 

The standard was "it isn't supported" but it does work

 

There are many here that do this

[Brian B 74]

That doesn't work. I have nethasp and get sim not found during RDP. I even had help from my dealer on custom launch scenario, no go. If anyone is really doing this with windows RDP and a net hasp it would be cool if they post specifics.

 

https://secure.logme...oducts/hamachi/

 

I have had great success with this and using MCX at home. Worked with our license server for NX so I had NX at home as well. I had MCX and NX installed on my computer at home and used Hamachi to connect to the license server to check out a license. No remote desktop here.

 

BB

[Craig-B]

It works if you leave mastercam running and just lock the pc instead of log off,

[Watcher]

This would work:

 

http://www.seh-techn...gle-server.html

 

And would centralize and protect all your dongles as well. It's certified by our paranoic CAD/CAM supplier (Missler Software)