Tool Manager List

[F10Brandon]

I would like to print off my full tool list I have set up in the tool manager so I can set up the exact same list in my Okuma mill. I've tried printing but it only prints the selected tool. If any one could help that would be appreciated.

[Thad]

X+ Tool List?

[Guest]

I select everything I want in my Op's Manager >> Right Click >> Tool List

 

I get them all

TOOL LIST.pdf

[cncworker]

When you have all your tools in the bottom window of tool manager, right click, import/export tools, report.  Then save where you want it, so you can find it. Thats in MCAM X9. 

Inside of MCAM go to toolpaths menu at the top, then towards the bottom is tool manager.

[specv]

My guess is you are talking about the "stand alone" Mastercam tool manager. There is not a good way that I know of to print out of there, except highlighting all the tools you want to print and print them that way. The format is not very good from the manager either. I would suggest doing it from inside MC like Jparis said.

[mikenaturalice]

I select everything I want in my Op's Manager >> Right Click >> Tool List

 

I get them all

I do this but I include the pics. It shows the extension length of the tool which is helpful.

[crazy^millman]

My guess is you are talking about the "stand alone" Mastercam tool manager. There is not a good way that I know of to print out of there, except highlighting all the tools you want to print and print them that way. The format is not very good from the manager either. I would suggest doing it from inside MC like Jparis said.

 

Yes I have to agree. The tool manger has a lot of potential, but tasks like this are not handled well.

[balnh]

Is there an easy way to include the z min and max to the tool list?