3d pdf

[cherokeechief79]

can a mc file be converted to a 3d pdf?

[Guest]

If you install the Free Verisurf add-on it can

[So not a Guru]

If you install the Free Verisurf add-on it can

Do I have to have a Verisurf seat to use this add-on? If not, where can I find it?

[gcode]

The download link is available in the very first topic on this forum

[cherokeechief79]

The download link is available in the very first topic on this forum

either im doing something wrong or im not sure what im doing at all.(probably the latter)

I tried downloading it for x 9 but couldn't do it for some reason.

any ideas?

[So not a Guru]

The download link is available in the very first topic on this forum

Thanks

[gcode]

Are these links working for anybody

 

http://www.emastercam.com/board/topic/78167-verisurf-tools-for-2017/

 

They appear to be broken, but we have a new IT guy and a new firewall so it may be a blocked address on my end.

As near as I can tell the download site appears to be down?

[htm01]

works for me

[gcode]

works for me

 

must be our new firewall 

 

Thanks

[cherokeechief79]

ok I must be a real dummy...

I downloaded it (for mc x9)on one computer and then transferred the file over to my standalone with mc on it.

the file was quite large and took 10 min to download.

I put the file on my desktop.

now there is a file named verisurf on my desktop.

the description says it is a "setup application" and I cant seem to open it or get it to run.

I tried opening it with mc but I cant view anything.

what am I doing wrong?

[gcode]

try right clicking it and select open

 

If you don't have Admin rights on your machine, you'll have to get your IT department to install it

[jeff]

Question on that Verisurf add-on.

Which function toggles the XYZ datum arrows on and off? 

[Jayson Kramer]

Jeff go into Preferences and look under WCS.

[jeff]

Jeff go into Preferences and look under WCS.

Thanks!

It's a nice feature, especially for my setup sheets, but if I have a point at the datum, I can't see it 

[crazy^millman]

You can also turn it off and on on the MBD tab.

[jeff]

You can also turn it off and on on the MBD tab.

This is what I was looking for, which one turns it on and off in the Tab? I removed that tab from the ribbon because it seemed those were for the paying customers of Verisurf. 

[crazy^millman]

In  2017 there is a Toggle WCS Axes in the all Commands you can add to your Quick Access Toolbar or your RMB.

[jeff]

In  2017 there is a Toggle WCS Axes in the all Commands you can add to your Quick Access Toolbar or your RMB.

Perfect! Thanks!