Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Excellent idea. The way it works now I find it easier to edit the code than to use change at point for many things.
quote:
Select the geometry Right click select "Options"
Change feed...
Now, that would be nice.
That would be very nice.
Cuda84
Click on the only display selected toolpaths button.
select first op only.
use the arrow key to step through all your ops until the one you want shows.
I'd like to have change NC filename, change program number, renumber tools and renumber tool offsets all in one dialog box so they can all be changed at once
Welcome Norm.
We have a fanuc 6M here which I think is the same control. The Parameter switch on ours is an actual switch on the motherboard, not a parameter.
I have a manual, though its missing the first 84
pages and possibly some of end
If you're refering to the bolt circle in the drill point selection box. Yes, it does do that and it is sort of annoying. I had forgotten that was there, I've always used the create bolt circle command then selected the points.
Hi Sonny, I'll agree with that. I tried this out a while back with the same result as you. I just turned it off until it gets fixed. You can use the toolpath editor for better results.
It seems to be putting the radius on the end of the tool, not the corners like a bull mill. If you set the angle to 180 it is not possible to radius as the lines are parallel. It should'nt crash though
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.