Cannon
-
Posts
344 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Cannon
-
I had same kind of errors when I installed X2 in C:mcamx directory. I just uninstalled it and changed it to C:mcamx2 and it worked fine.
-
It doesnt alarm in our Johnford vmc. It just revs up and then stops and start the rigid tapping.
-
quote: “ The spindle will start by itself. It will actually run faster because it will come to a stop before it starts the tapping cycle if you turn it on at the beginning.” What do you mean when you say “spindle will run faster”? I think he meant that the program runs faster that way. if you put S200 M3 in a different line than M29, the spindle will rev to S200 and come to a hold and start the rigid tapping.
-
Sharles there is help for your second problem click
-
Try ram saver and regenerate again
-
Go to control panel add/remove programs. It should be on the list
-
M16 thread with 2mm pitch. drill size is 14mm. H7 tolerance is 0 to +0.018mm.
-
Drop the rpm to 400 and use bigger drill if possible. We use coolant and rocol rtd with it.
-
We have been running two of our machines with usb/com adaptors almost a year now and have had no problems. Dont remember the name right now but those cost about 20 euros.
-
guess Im the only one with this problem.
-
I tried it and no effect. Also if I try to go to rmb settings page, it crashesh and trows me out of mastercam. I cant send the error message to CNC- software because I dont have internet connection in that computer.
-
Thanks. I try that tomorrow.
-
After I installed MR2, my mouse right button doesnt work anymore. I Installed side by side so I tried it in MR1 and it worked there.. Weird stuff...
-
There is an option in drill point manager to filter duplicates
-
Have you tried ram saver? It worked for me..
-
After creating curves use simplify. Now you have arcs and lines
-
Try ram saver.
-
Same problem here. It goes point to point and the track that tool leaves is not circle.
-
I´ve had "error generating operation" also. I had two session of mcx open and it messed up both of them.
-
You can use it in verify to see if there is places where the tool leaves material (doesnt fit in corner ect.)
-
Just tried it with demo. You are right, it has different name. guess that was the problem. Thanks.
-
I have a simple program that I use frequently that has some drilling and contouring in it. Today I added a contour toolpath that makes a chamfer to the part. Now when I choose all toolpaths and post it, the new toolpath doesnt post. If I post only that toolpath, it works. Everything looks fine in backplot. I guess it has something to do with MD. The original program was done before I updated to MR1. Could that mess it somehow?
-
Also if you use arrow keys to play the backplot, it always jams the first time and I have to mouse click the vcr bar again to get it work. Little things but annoying because it worked before..
-
I noticed the same thing with retract and feed level depths missing in backplot. worked well until mr1.
-
Is it even possible to update X demo? I tried to, but doesnt seem to work. I sometimes try stuff with it at home and it is really frustraiting to use because of all the bugs and crashes.