Zero
-
Posts
974 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Zero
-
you could try it out in rhino for yourself, just dl the trial version. its fully functional and gives you 30 saves
-
if you can put the file on the ftp or email it to me i could do this real quick for you in rhino
-
I would try and see if you can find driver version 4.x if possible. Version 5.x does not let you program the esc key to any of your buttons for some reason, which I find essential for speeding up MC usage considerably. a little bit of googling and I found them here
-
wow, thats not a bad deal at all gcode.
-
a shallow or scallop toolpath with your groove surfaces as drive surfaces and everything else you dont want to cut as check surfaces sounds like it will do what you want. You could also create geometry as boundries to keep the tool where you want it to stay as well. What ever is quicker depending on your geometry
-
quote: Eric, I dont know what config scaling is, I will look into it...thanksI believe he's talking about just opening settings>configuration and at the bottom of the window where it says Current: , select english from the dropdown menu and apply and it should scale your geometry acurrately for you
-
Felix, you got mail
-
I have a post for the anilam 3300 that should post out g18 and g19 moves. ill take a look at it tomorrow when i get to work and see if i can give you a hand sorting it out
-
what system are these iges files coming out of? you could check in the file open box, pick iges from the file types, click on options/masking and make sure there are no geometry types being masked from being brought in... personally I'd rather my imported files come in with only surfaces/solids and no geometry and build whatever geometry I need with MC. I've had much better luck with MC geometry than geometry created in other systems [ 06-15-2007, 10:49 AM: Message edited by: Zero ]
-
Why not ???????????????????
Zero replied to Eeyore-nonhuman forum member's topic in Industrial Forum
i wouldnt mind having the ability to create freehand toolpaths either -
T/C Planes not staying as set
Zero replied to Keith @ Solid Code Solutions's topic in Industrial Forum
Ive noticed dragging the red arrow around in th op manager will sometimes screw with my t/c planes/wcs settings....other than that my t/c planes always stay equal to my active wcs. -
quote: Make what your default setting for planes?= Topic: planes ALWAYS = WCS
-
as far as I know, there isn't a way to get the autosave function to work the way you want it to (like you said, the way it used to in V9). I too miss the way autosave used to function in V9 and am not too fond of the way it works now since the jump to X....so youre not alone in wishing autosave would work like it used to
-
try exporting it as igs or step out of rhino
-
9 minutes 45 seconds ASUS P5GDC Deluxe MB Pentium 4 3.4 (800mhz FSB)(with HT) 1gig Kingston PC3200 RAM XP Pro X2 SP1
-
you can send it to me if you want [email protected] or up the file to the FTP here and a few of us could dl it and check it out
-
A tree style layout in the view manager does sound like it would be pretty usefull
-
quote: I have had that dual box error since I installed X2.same here...actually I think Ive had it since the 1st version of X
-
bump
-
quote: I have one for G Codes but I would like one to post in conversationalthe mpan113x posts .m files in anilam conversational format. also, the controller itself has an option to convert gcodes to conversational, but ive not had much luck with it myself....
-
quote: I do not know but we just got an Anilam 3000 and would like to get the post. Can you help me with this?the MPAN113X post that comes on MC install disc should work for you. Might need a little tweaking, but it should at least get you running
-
me three
-
I get white screens all the time...but thats from switching to other programs while toolpaths are crunching in MC. as soon as the toolpaths are finished generating everything goes back to normal...never been a problem here
-
works ok here...personally, I rely on autosave (thumbnails and all) much more than the backups...
-
yes, i've downloaded and watched them. no problems here