I'll Strap you!!!!...LOL Funny thing is you fill out the wavier then it is approved by CNC and access is granted directly from them. So maybe his reseller hasn't even sent it in.

No summon nesessary, his job is to report all internet Activity, real time......

Gcode is a busy guy, give him a break Newbeeeeeeeeeeee, Your reseller sets you up Directly with CNC. At least that is how InHouse did it with me, for the brief Time I was doing it.

Stressful times, especially for beta testers. They work with the new software think things Are going well and then an issue shows up That stops them in their tracks and have to Make up that time and money. I get it, but then again my shop had to put a protocol On new releases to a minimum of an MU1 just For that reason.

Well let's see how much of this hits the JB website.....

If you ask me you all have overreacted. Joe, you don't even know if he voted for Obama so let them work it out.... ROR! Lets see if CNC fixes this, that is the only concern here in my opinion. The guy just wants a better .stl and it seems that others do to. How did this get to be about the size of a mans part anyway?

good suggestion, thanks

in due time hence why we need a tracking system that suits my IT guy's ideals.

thanks for the update

I believe they sacrificed .stl for better verify Results as they may not have been able To achieve good results for both. Maybe it's fixed in x8.

Sometime you have to go directly to your reseller to get a less arrogant uninformative answer. Wish I could help but I don't use .stl's for the reasons you posted in your pics. I found the Stock model (used only rest ruffing) are better, but then again that's all I would use either one for. This may be the last update for X7

Thanks John, I sent Him a few links to see if it is in his scope.

Our CNC department is having issues with multiple users on different P.C.'s where some one made a mistake on a job and after other users opened that file and made changed and saved, we have now way of knowing who did the mistake. Is there a software that my IT guy can set up on the server that would make everyone using mastercam in that department on the NET hasps log in to a job and record who, and when an MC job was worked on. Would be even better if it could show what changes each user did in Mastercam..... Any thoughts and possible solutions would be greatly appreciated, Rick

Any time you import out of any library(even if you are prompted) change the name again by selection(after you save first), occasionally it will bite you even if you were prompted, usually dependent on how long you had MC open, in one sitting(which a restart fixes the memory leak issue for most all MC redundant problems)

If I import an entire toolpath group into an empty toolpath group it will ask to rename on import and all is good too. . This work great for me.

mine is as JP stated in config, but I still have to do this.... . highlight all toolpaths in group, then right click on tool group name (which I name the same as this procedure) . Once I do this (as well as the setting JP suggests) I am good to go and all new toolpaths, (not imported or Copied paths), will have that name. I had tried to re-produce your problem, but I cant as of yet.

This is the method that I use also, works great.

do a system image first then if something goes south.... 15mins later you are back in action ....like it neva happened

HOUSTON....we have an update!

I hope it works great, cuz I am auto-updating now.....LOL

I Always do a system image prior to any MC major install. That way you are never dead in the water if you or your P.C. messed sumfin up. takes 15 minutes to restore a system image.

Tim, you should be able to do a system restore to the day prior when you started this endeavour. That should get your registry back and you may be able to start over.

Very nice!

I am pretty sure it will be fixed in MU2

3.3 meg