Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
Synthetic coolants eat off the machines paint.
Are water grinder runs Castrol and after 5 years
it looks like 25 years old.
The theory with some of the Toolmakers is
"let them rust then maybe well get new
equipment once a decade"
I should have been a Union plumber...
Its true the guy said my Brand new Hot water valve was inferior and replaced it and the stuck cold Valve....
This was an expensive "I told you so"
lesson to my wife.
I replaced the Hot I could probally do the Cold!
But take a look at the "union plumber action"
Going on.
I will be calling that contractor tommorow!
"Turn the water off and un screw and screw on two valves at $299.00 out the door"!!!!!!!!!
[ 10-07-2003, 10:43 PM: Message edited by: Tony ]
I wondered why I.T. came around and made sure all the Phone procedures were in place.
although they caught my message
"Hello"................"You have reached
The Toolroom, either its Sunday,
are boom boxes are on 10,
Or Joe is fighting with his wife again"
[ 10-07-2003, 09:58 AM: Message edited by: Tony ]
I brought my daughters out shed hunting when they
were between 5 and 10 they liked it.
We were "Treasure hunting"
Dress it up all I wanted...
They brought there Barbie dolls with
and wanted me to carry them most of the way.
My son is now 6 and he loves the whole idea
He fits into the camo sweatshirt and pants and gloves that his sisters never really wanted any thing to do with.
He has a 10 lb bow and we shoot arrows together.
He also comes with me to scout,hang a stand or refuel a dripper,thats plenty for now
[ 10-02-2003, 11:19 PM: Message edited by: Tony ]
Kohler used to have 750 cylinders
Nickelsil plated a month
By Max power/US chrome in WIS.
But it was an EPA nightmare
(As it should be)
Now All the cylinders are sent to China to be plated,Dump it into the river over there...
[ 10-01-2003, 09:46 AM: Message edited by: Tony ]
Roger
"CNC 5/12/94 - Initial post setup for Mill5"
She is getting up there isnt she...
I have no idea where to start.
well Backing up the post is a good start.
I will manually edit my code.
then make sure the controller takes it.
And then send it to my reseller and say I need this to come out of my post when I Transform.
Tony
Hello
I have a Max controller with the ISNC option(Fanuc emulation)
on a Hurco mini mill
we didnt spring for the sub option
on this one.
I am trying to run two vices on this
"workHorse"
In transform toolpath I set it so it
increments to one starting with zero.
The second operation shows up
But when I post its only a g54
there isnt an offset toolpath call
mi1 - Work coordinate system
4 thru 9 = The WCS of G54 thru G59 respectively at each tool.
pwcs
# G54+ coordinate setting
if mi1 >= 4, *sgwcs
How do I tell my post to
If , then?
Thanks in advance!
Tony
What does Billy Graham and the Chicago Bears
Have in Common?
They both can make 60,000 people jump up
onto there feet and Yell "JESUS CHRIST"
We have no Quarterback
My Dad is 80.
When He backs up he honks his horn
He might look in the mirror too I am not sure!?!
About three years ago He came over for Christmas
And the Front end of his dead mint 85 Crown vic
Was Smashed in.
He said he hit a huge Deer
on RT 19 By the Mcdonalds ,
I was thinking thats all Industrial park and Bad apartments!? My brother in law said he saw a Sox hat in the Grill!!!
Oh well Merry Christmas.
He passes all the Dmv testing every year.
He won't drive at night if he doesnt have too.
When He must He has a Cup of coffee before he departs (He falls a sleep like the Grandpa on the simpsons...mid sentence)
My sister made sure everything that could be in a trust is ,just in case he Runs into a whole herd of Deer one day!!
Oh well, all in good fun here.
It is a Serious issue as it happens
More and more frequently
The Company that I work for
Has always thought that MC was
Low end stuff just because they don't
Work from a Maintence standpoint like
all the big names do.
Nobody can get through are phone
security system....My teenage daughter
on it all evening while I.M.ing
Ten different people on the P.C.
One of are liberal interns points out
"Do you know how many people will
lose there jobs because of the Do not call list"
Whats Next?
Also by 2005 More Humane Lawn mowers
All Lawn mowers imported to Europe
Will have to have a Two blade system
One Blade Stuns the grass with a blunt edge
Once "Stunned", the second blade will Humanely
cut the grass.
[ 09-23-2003, 01:31 PM: Message edited by: Tony ]
I put "Convertingtool.exe"
in Jays "Viewers" folder
It covers quite a bit and its free.
I also put Irfanview.exe in there
That one needs to be registered
(Jay if the Irfanview is a no-no
Delete it,no biggie)
[ 09-16-2003, 06:17 PM: Message edited by: Tony ]
I saw that download,
Here I am trying to find the reverse of it
Being that I spend 80% of my time in MC.
Does anyone have the addy to the SW furom?
Cad portal something?
I have to have my web sites approved by
The "Warden" so I cannot even search for it myself.
Is it possible to see the File preview
of a Solid works file while converting
it in MC?
This would end a lot of frustration
with the endless config's of the same file
in SW.
Currently I locate the file I need in SW
then bring it in through MC
Thanks
Tony
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.