Tony
-
Posts
693 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Tony
-
I put a "60's F1" pinewood in the mc8 folder. Everyone Download it and verify it. its pretty cool. It comes out a little rough so Jr. can sand it and feel a little more involved.
-
Straight copper or copper impregnated?
-
Here she blows! I have a Red roll around too. I made all of those tools. I worked there from 1990 through 1993. that place wasnt pretty but had a wire, a heat treat oven and a stocked steel rack. the 20% night premium helped too. The Bench is still there with my 80's rock inlays [ 01-07-2004, 09:56 PM: Message edited by: Tony ]
-
I had to work every Sat. From June through August. There back, Saturdays all through January. Not to bad 4 months straight without them.
-
2500 hrs + I would Love to never work another Saturday Ever. Life is to short....
-
Welcome Pezz [ 01-06-2004, 11:52 AM: Message edited by: Tony ]
-
I would go Nevada,Idaho.
-
Dan L.
-
I just finished watching the three stooges with the little guy (6) Yuc,Yuc,Yuc
-
Jack so true... When something Gets fixed in there o/s With there next upgrade. You will then lose something ! The manual jog is now liquid smooth.... But now Recovery restart doesnt work anymore! Next patch mmmmm 6 months from now!
-
The guys from Hurco who Babysit there operations in China, tell me Everyone over there Uses bootleg Mastercam.
-
I got it with about 24 hours to spare.
-
MG My Buddy Who MCam'ed for C&S till there Auction, is in FL. till mid Jan. I'll leave a Message on his machine.
-
Have a good one everyone! Any New years resolutions out there? I am going to start eating breakfast (cereal) instead of ramming down a pot of coffee as breakfast pretty lame huh?
-
The thing I like about are Hurcos the most lately is when someone brings me something I can say "Come on ,You can do that yourself"
-
Is there any way to Pull up my entire library At once and pick out my material say P-20 and then in one Mouse click have it calculate all the tools speeds and feeds So know I have a P-20 tool library in only a few mouse clicks? Thanks Tony
-
Carbon I program start to finish Because some thing might snap off so i might have to shuffle around how I got That far so it won't snap off. Steel I usually have a rough / semi/ finish set of operations Because here at the Country club They Want the machines running... Only then there paying for themselves. slamming a few operation into them at a time Creates that picture they want.
-
I'VE GONE MAD!!! [ 12-28-2003, 07:03 PM: Message edited by: Tony ]
-
We figure "Perishable tooling" Into the build or Job. I fill out a "Purchase Requisition Order Form" For the cutters/carbon/boring head module we don't have, for the job. Hey some cutters go 6 cavities then the next cutter snaps off 1/2 way through the first piece all at the same speeds and feeds. (We have all been there scratching our heads) Huh?... [ 12-27-2003, 10:34 PM: Message edited by: Tony ]
-
Are local Deer could have C.W.D. Are local fish could have Mercury in them Now the Beef could have M.C.D. Running out of options here...
-
Here is a Christmas story Last year my son recieved a giant glider and a rocket set that launches with a bike pump (From me) I started to wonder once the Christmas Frenzy had settled down about a week later Where is the stuff I gave you? "I put it at the back door because its outdoor stuff" Oh...cool...I guess that meant I tossed it into recycling with all the other Boxes etc..GONE! Now he was starting to look for it since I had brought it up! I had to reorder the same stuff and stall for time.. "Oh look here it is I must have put it on this shelf"....saved
-
"Fudge Coil" BUHHAHAHAAA!!! Thanks man That made my day
-
We got them here too There qoute is : "Hey I'm paid to put the chips on the floor Not pick them up" There theory is also "You run the machines into the ground then You get new ones"...
-
RC car jumps house link/Download http://collegehumor.com/?movie_id=26148
-
Steve Kind of how a Cache works? As your features are reconized it would prompt you "Hey this is what you did last time, here are your operations" Charles I was mislead that CamWorks Was a True solidworks product I wonder about All there other (insert title here)Works? [ 12-20-2003, 07:07 PM: Message edited by: Tony ]