brandon b
-
Posts
504 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by brandon b
-
Been in there plenty of times. Can't seem to find Fuse. Haven't had time to get my tester out and start tracing wires back
-
Anyone know where the fuse is for the floodlight. Fadal vmc 4020... a couple of our fadals lights don't work. Yes I've checked the bulbs
-
It came from catia. Edges are good. I was jus5 worried I undercut the periphery by setting the total tolerance to .01
-
I use the filter alot for surface finish toolpaths. Usually just set the total to like a thou or 2.. and about .01 for roughing. Also tell it to create arcs. Never had it set to .01 on a periphery cut before. I only use it to make the code smaller For some of the old fadals and anilams
-
Ok. That's a bit of reilf. Already machined 30 parts to finish. It's titanium about 30. x 8. x 1.125" that would have been an expensive mistake. Due to the shape I cant really check the periphery. I can eyeball it with a scale. no cmm or calipers that big.
-
Say I chain the periphery on my part.( the shape looks like a skateboard deck).. I didn't notice that my arc\filter tolerance was set to .01" how much can it undercut the part? question 2: does back plot show the path with the filter or is that apply in the posting of the program?
-
haha. Cell phone pic
-
Well I typed a . Only to fill the text box..it won't let me post a pic without text lol didn't even think about the irony til now...
-
Lol
-
.
-
In the chaining dialogue there's a button for a point.
-
Click it first then click your contour.
-
Cant you also chain the center point first then chain your contour.
-
Surface finish project
-
Cant open your file. But usually this happens when you have "smooth " instead of straight checked on the transition page...
-
The heli coil removal tool is your friend
-
There's where you can choose to project normal or view
-
Tool Deviates From Program
brandon b replied to CarbonCAD's topic in Machining, Tools, Cutting & Probing
When we moved to a new building, we where cleaning out the old building and found all thoses parts that " that we never received...or I have no clue about those parts "thrown up in the rafters buried in the insulation on top of the office's -
Tool Deviates From Program
brandon b replied to CarbonCAD's topic in Machining, Tools, Cutting & Probing
When we moved to a new building, we where cleaning out the old building and found all thoses parts that " that we never received...or I have no clue about those parts "thrown up in the rafters buried in the insulation on top of the office's -
Thanks.
-
I have a friend that needs two of these machined out of aluminum I honestly do not have the time to do it.. located in southern California.. they are upper arms for a offroad truck.
-
Trimming a toolpath- want to remove a move i dont need
brandon b replied to mike561h's topic in Industrial Forum
+1 for the webinar..ive played with tge editor a few times and just give up and edit the code myself..i hate doing that but i need to get the job done.. -
Did you know Mastercam has "hidden" 5-axis toolpaths?
brandon b replied to Colin Gilchrist's topic in Industrial Forum
Ive seen ninja has recent activity on his you tube -
Blend..
-
Ya cypress was awesome... not sure I'll make it if its by six flags...
