BernieT
-
Posts
1,523 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by BernieT
-
I can't help with ras2vec but if it's fairly straight forward I'll trace it for you. Email to bjtautz at yahoo dot com HTH
-
quote: Google search for a free program named "Greenshot" Also "Irfanview" - very good !!! .
-
This is easily done in Rhino3D Example: Use the command 'Transform-Flow along curve' select letters, enter, select orig backbone, select new backbone, - done. For best results the new backbone should be the same length as the orig backbone. HTH
-
-
Rickster, try looking at slate roofing tiles. They have all kinds of rocklike patterns. HTH .
-
Welcome to the forum!!! What they said!! .
-
mask on arc does not select arcs located on z zero
BernieT replied to Pelican's topic in Industrial Forum
Joe -
File-Next Menu-Communic-Send-(select file)-Open HTH
-
Check with your reseller on Monday, if he can't help I'll send you a copy of a v9.1 disk. .
-
Hi Matt, I could make a copy of 9.1 disk and mail it, but wouldn't you have the same problem reading it as you would with the orig disk??? .
-
Great site Mike !! Neat part is you can pick an airfoil, click on it and it opens in Notebook, now delete the heading and save the file as a .txt file. Mastercam can 'Convert - Read' an ASCII file - select the airfoil txt file - read it in as points and 'voila' :
-
.
-
Welcome to the forum !! I think I would draw 3 or 4 cross-sections of your blade (in the correct place and orientation) and then do a lofted surface between. Maybe a network surface to finish the blade end. Alternatively, draw the cross-sections and a spline of the parting line and use network surface to make the top and bottom surfaces. I don't see a need for a sine curve. Good luck !! Maybe try some google searching of 'boat props' for more ideas. .
-
Oops .
-
Good card: Quadro card .
-
Lots of fonts here .
-
You should install the font you want into Windows, then it will show up when you pick the True Type font in Mastercam. HTH .
-
Try Craigslist Ventura County web page
-
Charlie, you might have some luck here..... Jobs listed on Mastercam website HTH
-
Again, use Rhino3D for that. Add control points, rebuild the spline, edit weight of control points, remove control points, move 1 or many control points at a time etc. Rhino3D = great compliment to MC HTH [ 05-21-2009, 04:40 PM: Message edited by: BernieT ]
-
Would 'Combine Views' help ??
-
If it a straight-forward shape, send it to me, I will use Rhino and put surfs on the points. e-mail is in profile
-
Michigan just sucks, Thad
-
You really need a 4 flute, I don't think you will have a chance in he11 with a 2 flute. Good luck
-
Please do a search James, this has been debated many times. Include NX in your search.