Joeyls319
-
Posts
384 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by Joeyls319
-
Thanks Roger That's a good point. I'm not sure he thought it completely through. Joey
-
Does anyone know how to disable the hold /run button? We just got the machine in and and the manager wants to disable it. Thanks Joey
-
Tom, We're located in New York, about 2 hours south of Rochester. Joey
-
Bradst Thanks. I'll look into it. Joey
-
Morning everyone I'm not sure if this is the place to ask this but I'm pretty sure that someone here could answer my question. We want to probe the part on the machine (Haas). Is there a way to convert a PC DMIS on the machine. Or somethng to do with macros to get it to read the file. Any help would be appreciated. Thanks Joey
-
I tried for the first time the other day. I used a steel brush about 2.00 in diameter. I really didn't care for it. I went alittle deep on it and heated up the part. I'll have to try the nylon ones. Any thing I should know about them. Joey
-
Mike, I just tried it and you just saved me a lot of trouble. Thanks Joey
-
Jay My donation is on the way. Just want to say thanks for all that you have done. Joey
-
Tim, We just got Vericut about a month and a half ago (and are pretty pleased with it). It's already saved us a few times, (one the very first job we ran through it). If your looking for a way to justify such a cost, there is a thread about justification from actual users on the vericut forum sight. Just thought I'd mention that to you. Joey
-
Frank I got to agree with alot of the points made in this thread. The grass may be greenier somewhere else. Just stay strong and believe in yourself and your abilities. best of luck in whatever you do. Just my thoughts. Joey
-
Dacey We've just got the ok to purchase one. I'll have to let you know when it comes in. Joey
-
David You may want to ask the same question on the Vericut forum. Joey
-
Thanks folks, I folowed what it said in the help section and did what Millman told me and it worked great. Thanks Again Joey
-
Dave Thanks, I didn't even think of that. I'll give that a try. Joey
-
Could anyone tell me how to create a custom tool file? I can't quite figure it out . Thanks ahead of time. Joey
-
Degmc Can they be customized to fit specific needs? Joey
-
Jay Thanks, I would apprieciate that. Joey
-
CadCam, I was wondering if you would please let me know about the online classes if and/or when they happen. I would be very interested in taking them. Just wondering, thanks Joey
-
I usually will save the solid to another level and cut it with a surface wherever point I want to slice it. That's the way do it. Joey
-
Tony, I see your from Crning. I'll take it your in Mike Reynolds class. If you would like,I would be more than happy to stop by the corporate park building to give you a hand. Mike has done a lot for me and I would be more than happy to help you out. I get out at 3:30. Just let me know what is good for you. I'll keep an eye on the forum and let me know if you want me to help you or not. HTH. Joey
-
That's quite alright no problem Joey
-
unfortunately
-
Hey Gayman, I hate you.
-
Thank you gentlemen.
-
Morning folks I was wondering if there is a way to measure the angle between two surfaces? There's analyize angle but that only allows you to select lines. What I want to be able to do is select two surfaces. Any help would be appreciated. Thanks and have a nice day. Joey
