So one more bug?

hi Murlin , What did you do to get good result? My new surface right below green s/sphere!

thank you guys for the response . I uploaded file to FTP - ..X3 filestrim_surface.mcx. I am trying to trim surface (blue s/sphere and leave middle part) .

Hi , Playing with X3 Create s/sphere ( delete bottom) . Than I trying trim this surface to curve .Curve is rectangle . New surface created below original . What do I do wrong ? Thank you in advance

Thank you John

Is it upgrate pre-release or I have to uninstall pre-release and install official release as fresh ? Thank you

Thank you cobra95kev

I used it in past few times . If you can give me some tip , will be grate . Thank you in advance

When using HSM tool paths and holder gouge checking/avoidance option I'm getting message about possible left over material . How do I know if there is or where the left over material is ? [Cheers]

What about processing time ??????

Yea working ,thank you again !!!!

Thank you very much Kevin for the response. I just about to try

Hi , I have some problem with HS Rest roughing tool path. Sometimes it work fine , but sometimes is digging in material . Usually i am using "all previous operation " option to let mastercam to calculate stock . Never use "CAD" option . Can some one explain how to use it ? After roughing.... i can save STL on Verify , but how to rich this file to use as stock can't figure it out . Thank you in advance

Hi all , I have question for 4-5 axis users . I tool maker and never used 4-5 axis programming on Mastercam . I trying to learn this field of programming now . I got file from http://www.emastercam.com/files/x2_45axis.html And to ruin backplot for file” tut_rotery_toolpath _x2 “ It does so many unacceptable things . 1 oper : drill 4 holes . Picture rotate -180 deg when I open backplot . If rapids visible it does some funny movements 2 opr : drill 8 holes Picture rotate -90 deg when I open backplot. Tool does Same funny movements also Anyone can explain me reason of this ? Is it possible to fix it ? Thank you in advance .

BTW , for Okuma G0 canceling drilling cycle as G80 So you don't need G80 at all .

Hi everybody , Thank you for response In ver 9 was two ways to convert spline to arc : "CONV to ARC" and :Break "spl to arc" .If one not working other does . In X "simplify" not always help. I used filter in Mastercam , not always help to . Also when i machine surfaces which represent arc with relatively big dia i have same (facets)diamond effect . I guess setting in control an issue . Now it reconstruct shape to precisely or so .

Hi , We running Okuma VMC MC –v4020 . Control OSP –e100l Super HI-NC control . Machining mode – Standard. If geometry spline instead of arc surface finish look like kind of “diamond “. I guess this is wrong set up of ” reconstr shape” and filters . Somebody has this problem? How it was solved? Thank you in advance

thank you gcode

Hi all , Guys, how big the difference between 4/5 axis machining in mc v9 and mc v x2 ? Thank you

We are also very slow now . For 9 years working for this company . I don't remember times like that . This is B.C Canada

Hi everybody . Thank you for tips . i am fighting with this stuff. Coming better now. First parts was to hairy . Hope will be ok now .

How to machine UHMW PE plastic to get good surface finish? Thank you in advance

what about time calculation? Model will be in solid. Time for calculation shorter if model include surfaces only so far . Using Solid model make calculation time longer isn't it?

Is okuma has pecking cycle for the taping?

It become faster now?