Is mastecam x3 will able to use multicore ?

Opps sorry , just clarifying I am running X3 . Old post converted for x3. I wonted adopt new x3 mpmaster

you are right ,hardmill , we pushing buttons but when you going on plane, you trust a pilot and some one who build the plane isn't it ? I trying to adopt post for x3 . To not damage my currant set up , I copied and renamed all necessary files to create new machine . I set new post for new machine definition . Then after while i started new file. Checked In Op Men property's in "file" my old set up .It came out right files (mmd, control etc ) Then when i started programing i found it changed my setups in control definition like arc parameters and tool setups (offsets ). Why ?

mastercam like a girl Every day new surprise . Today nearly scrap very expansive part. I guess time for fixing bugs and etc. When SP coming out?

hey Tyler , He still Mastercam user

Thank you guys . ajmer , this is what I wont. working fine

Is there any command to make full circle tangent to two ARCS ?

Hey guys , Is it meter what pan do you use ? In my opinion meter hand which hold this pen. Best software which you do know isn't it ? But ,definitely, Mastercam has issues with processing time and reaction on the reported bugs .

What about "pockets by level "????

Hey Mike , can you use "note" option ? Don't use "letter" '

thank you guys But how i can create letters by using "one line font"

Hi , Is there is way to alight note (not letters) around circle? Regards

go on youtube and you will find a lot

Hi , Trying to verify against STL file in X3 , but the resolution is so poor . Is it possible to increase resolution on stl ?

Hi Mastercam x3 Multi Pockets "depth cuts " > by depth is NOT WORKING!!!!?

Hi Collin I can't find any of Karlo's books online Can you help with the link?

zoey , are you interesting in Canadians ?

"facing with controlled engagement" Sorry for stupidity What kind of toolpath is it ?

Can I use 2d high speed toolpath for facing ? Thank you in advance

when I am trying to import the entire solids history 1 it taking so long , even part is simple. 2 I got all sketches (junk entity) on separate levels each . They (entitys) still associated with the solid model (you can't delete them) ?! I can imagine what will be if model is more complicate

I had this issues tooooo.

Hi , How to keep "cut parameters" not changing when i changing tool in copied (or not ) operation ? Thank you in advance

What about 6.2 ver . Is it friendly with mastercam x3 ?

Hi , Is Vericut running under mcx3 interface ?

If it is , why it not fixed ?