smokey_44
-
Posts
333 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Store
eMastercam Wiki
Blogs
Gallery
Events
Everything posted by smokey_44
-
Hey Thad , I just did a test for you ,I exported dwg out of Visi (design software) at 3.99mb and then brought it thru mcx mr1 and it turns out to be 11.4mb , these files that i exported are only drawings (no soilds no surfaces) Dave
-
I would just type the code in for a 1 time thing Dave
-
Hey James think he should create a backup ? LOL Dave
-
I cant get to the link by the way they block access to the internet and allow only certain pages to get thru ....Not that link of course... Dave
-
The flash cards that we bought ( i was not involved) are "old" and they dont make them any more so thats why I said about $$$$ if you buy the wrong ones they go outta date quick. Thats whats happened here. They thought it was easier to goto dnc. Dave
-
watch the flash card ,we had them here, there great as long as they work (guys drop them and stuff like that ...now we can't replace them unless $$$$),we ended up with Focal point to send to machines Dave
-
I don't think its possiable, but the direction they may be headed is using the stock setup with an offset to apply a safety zone ( if you look in the stock setup they have an option to use a file). just a thought Dave
-
Selection box size Jesus Christ!!!!!!!!!!!!!!!1
smokey_44 replied to Ivan's topic in Industrial Forum
lol Dave -
Cutter Comp Provblems
smokey_44 replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
sorry i was looking at contour , uncheck the start at center thing then you will be able to put a value in the entry/exit area. Dave -
Cutter Comp Provblems
smokey_44 replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
Type a value in next to the %. Dave -
Cutter Comp Provblems
smokey_44 replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
Damn john your fast lol...tooo much time on your hands ? lol Dave -
Cutter Comp Provblems
smokey_44 replied to Randy Morton @ Clem Industrial's topic in Industrial Forum
It sounds like its picking up the cutter comp on a arc move? check that you have a value for perp entry. Dave -
SWEET ... Dave
-
bump
-
bump ....for johns sticky .... Dave
-
miracle worker .... Dave
-
hey hardmill check the post "help" for Johns sticky if ya wanna ... Dave
-
lol ...green and red lol .... thats about it! lol Dave
-
ohhh sorry ....hang on I just resent it now. Sorry about that I thought that you were just another user just wanting to look at the file. Dave
-
"Alot of CNC Operators consider themselves Machinists. This is Incorrect." I could not agree with you more. "button pushers" Dave
-
John's sticky....lol quote: Ideally a topic line like help Does nothing for people scanning thru to actually get an insight into what your situation might be. If I could suggest using a topic line a little more indicative of such. Dave
-
I sent it ,just rename zap to zip. Dave
-
I seen this (or something simular) to this in v9 ....the file had alot of dimesions in it. I rember that if i called that file I would get alot of errors opening it and everytime you moved around in the file the same errors again. exit to get rid of it. I found in the end that 1 or 2 of the dimesion where causing the problem ,when I did a dimesion it seemed to get screwed up if I did an intersection point on a 3d part but used the top plane for the dimesion,after I did those dimesions again it was fine. Dave
-
why not just turn on the spindle then ? Dave
-
I think you can mark the tool as undefined and filter them that way. That way you can see just your "screwy" tools in the list. Dave