Register now to participate in the forums, access the download area, buy Mastercam training materials, post processors and more. This message will be removed once you have signed in.
Use your display name or email address to sign in:
David
Tryed all them and still no luck. Might have to bite the bullet and buy a new one .
Did you ever deal with Bob Turner at Dimac?. Been a while since i rang him and he has left them.Any idea where he went to?.
Darren
Hardmill
Tryed them and had no luck. I,II keep looking around.Thanks mate.
Sorry for posting this topic in the forum Buliness. move it ot O/T if you like.
Good Morning everybody
We currently have a small die grinder in need of a new shaft.
Faro ART 200.486, series10902, V240-, A3, W300, HZ50, 22,000 rpm .
I,ve had a good look around the web and found no one at all in Australia that can help out.Is there anyone using one of these grinders and if so, who is the supplier of these now. I know it used to be Kemet, but they do not stock spares for them and can,not tell me who has taken over.
Any help would be appreciated
Darren
Tim
Pricy for sure. But the best drill i have ever used. Tool life justify,s the cost .
I ran one on a old Mazak M4 Lathe at my last place. We used a 48mm X 3D to drill & rough bore the rollers we were making. I was the same when the rep told me what speed and feeds to run at.I set the drill up started the cycle, got to 5mm from the front of the job, cycle stop and then got him to come and push the cycle start.I stood about 15 foot away .
those speeds and feeds look about right.
Happy Drilling
Budgie
Would love to have you down here. But as for the Queenslanders, we carn,t hire them down here any more due to the quality of beer they drink.
hope you had a good weekend guys
Darren
quote:
I've been following the X verify post and do not want to create any flamings here.
dont be scared J/K
I run it through with no problems but cannot run the 2nd op-surface finish scollop.Comes up with an error reading from Surface Machining Temp File .Is this where it is stopping when you run it through your verify.
quote:
It has become a part of their psyche in that if MC is insulted somehow, the person feels insulted.
Could it be that these people that you talk about might feel insulted due to them using M/C for a number of years, going through the same problems that these M/C Bashers are posting about.And a lot of these people that you are talking about are the ones that do the testing on M/C.
I would say a lot of us sit in front of M/C for more hours a day than what we see our Family,s. (which can have its plusses)
So it only natuaral that they are going to pi**ed off if someone comes in bagging their favorite tool. Everyone has the right to vent on this forum but be prepared to cop a flaming for Crap statements.
quote:
I think all these youngsters are
just too lazy to set it up right.
All it take is a little patience, and with the support
on this forum, it makes life that much easier.
+10000 Steve i could not agree more. Harrys post was solved on the first page.
A Big Thankyou to all the Mastercam Ego,ers. You have made my life a lot easier over the past year
Darren
PiP
Check what parasolid version he is saving them in. If you ask him to save them in version 13(which he has the option of doing in solid edge) you wont have any troubles opening them up. I think the latest version of solid edge saves in version 14.
Darren
Good morning everybody
First of all i would like to say This is not a bash so turn off the flames
The question that i have got is that if i upgrade to version X and sent a file to a customer that is stil running V9, Is he going to be able to open the file in V9?.And can anyone see any other problems occuring from this upgrade?.
Also has anyone had any information for justification of upgrading to version X. I know a lot of you guys talked to the people on the stand at the I.M.T.S. i would be interested in people,s thought,s on why you should upgrade.All comments will be graetly appreciated
Regards
Darren
Thanks for explaining that Thad and thanks for the link Iskander.It is a good idea to make the newbies welcome. I thought that you might all still be in Thanksgiving mode after the weekend.
Darren
and should have said before, Welcome to the Forum Mudasser
+1 scott333.
We have the OSP E100M on ours. I have run 7000,s 700,s 7000,s and V10M. All controllers have there good and bad points and like jeff said, the 10M can give you a bit of a headache if you are spending some time in front of it.
We made sure that we had the latest contoller when we brought the machine (windows base, supernurbs IGF etc.) But after going over to M/C , i hardly even touched the IGF and very rarely have to mess with the contoller.
All depends on how much you use the contoller and what functions and extra options you have.
Regards
Darren
David
justgotback J/K
Sorry mate. I did,nt check back before i went.
I have my last day at Tafe on the 2nd of December and my boss Myself and Smithy might go out for a drink.
I,ii give you a yell when he work out what is going on and i know you would be more than welcome. Speak to you soon
YEEE HAAAA 200 POSTS
Regards
Darren
eMastercam - your online source for all things Mastercam.
Together, we are the strongest Mastercam community on the web with over 56,000 members, and our online store offers a wide selection of training materials for all applications and skill levels.